|
|
|
National Stock Number:
3040-01-505-2304
Federal Supply Class:
3040
National Item Identification Number:
015052304
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 157D3327 | 05606 | GENERAL DYNAMICS-OTS, INC. |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 0.9800 INCHES MINIMUM AND 1.0200 INCHES MAXIMUM | | FIRST END INTERNAL THREAD LENGTH | 0.860 INCHES MINIMUM AND 0.900 INCHES MAXIMUM | | FIRST END FLAT DEPTH | 0.1400 INCHES NOMINAL | | FIRST END FLAT LENGTH | 0.970 INCHES MINIMUM AND 1.030 INCHES MAXIMUM | | FIRST END STYLE | FLATTED AND INTERNALLY THREADED | | LARGEST STEP DIAMETER | 0.980 INCHES MINIMUM AND 1.020 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | WW-T-700/6 (6061), TYPE 1, TEMPER T6 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-A-255/8 (6061), TEMPER T6, T651. FED SPEC SINGLE MATERIAL RESPONSE OR ASTM B 221 (6061), TEMPER T6, T6510, T6511. FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | ALUMINUM ALLOY 6061 | | PART NAME ASSIGNED BY CONTROLLING AGENCY | SHAFT, SHOULDERED | | PROPRIETARY CHARACTERISTICS | PACS | | OVERALL LENGTH | 9.670 INCHES MINIMUM AND 9.830 INCHES MAXIMUM | | SECOND END DIAMETER | 0.9800 INCHES MINIMUM AND 1.0200 INCHES MAXIMUM | | SECOND END HOLE DEPTH | 0.605 INCHES MINIMUM AND 0.645 INCHES MAXIMUM | | SECOND END HOLE DIAMETER | 0.1640 INCHES NOMINAL | | SECOND END INTERNAL THREAD LENGTH | 0.860 INCHES MINIMUM AND 0.900 INCHES MAXIMUM | | SECOND END DISTANCE FROM HOLE CENTER TO END | 1.697 INCHES MINIMUM AND 1.730 INCHES MAXIMUM | | SECOND END STYLE | CROSS DRILLED HOLE AND INTERNALLY THREADED | | SPECIAL FEATURES | XFIRST END HOLE DRILL AND TAP FOR CONTINUE THREAD ROD P/N NAS1454C8A-0100, ALT P/N 197C8526-2. SECOND END HOLE DRILL AND TAP THRU SHAFT FOR 0.164-32UNC-2B INSERT P/N MS51830-110, END DRILL FOR 0.625-11UNC-2B INSERT P/N MS21209C810P. | | STEP QUANTITY | 3 | | SURFACE FINISH | 125.0 MICROINCHES |
|
|