|
|
|
National Stock Number:
3040-01-505-5889
Federal Supply Class:
3040
National Item Identification Number:
015055889
Description:
SHAFT,STRAIGHT
Detail:
A straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for jubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.
|
Manufacturer Information:
| 596-7409702-26 | 53711 | NAVAL SEA SYSTEMS COMMAND | | 596-7409704-14 | 53711 | NAVAL SEA SYSTEMS COMMAND | | 7409702 | 53711 | NAVAL SEA SYSTEMS COMMAND | | 7409704 | 53711 | NAVAL SEA SYSTEMS COMMAND | | B831-4200-26 | 96169 | ELECTRIC BOAT CORPORATION | | B831-4300-14 | 96169 | ELECTRIC BOAT CORPORATION |
|
Techincal Specification:
| FIRST END DIAMETER | 0.6250 INCHES NOMINAL | | FIRST END SPLINE MAJOR DIAMETER | 0.6220 INCHES MINIMUM AND 0.6230 INCHES MAXIMUM | | FIRST END SPLINE MINOR DIAMETER | 0.5220 INCHES MINIMUM AND 0.5320 INCHES MAXIMUM | | FIRST END SPLINE QUANTITY | 10 | | FIRST END STYLE | SPLINED (STRAIGHT) | | FIRST END SPLINE LENGTH | 1.040 INCHES NOMINAL | | OVERALL LENGTH | 17.690 INCHES NOMINAL | | END SIMILARITY | NOT IDENTICAL | | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM-A564, TYPE-630, CONDITION-H1025 ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL CORROSION RESISTING | | PART NAME ASSIGNED BY CONTROLLING AGENCY | SHAFT ATHWARTSHIPS MDL | | SECOND END DIAMETER | 0.6250 INCHES NOMINAL | | SECOND END SPLINE LENGTH | 2.250 INCHES NOMINAL | | SECOND END SPLINE MAJOR DIAMETER | 0.6220 INCHES MINIMUM AND 0.6230 INCHES MAXIMUM | | SECOND END SPLINE MINOR DIAMETER | 0.5220 INCHES MINIMUM AND 0.5320 INCHES MAXIMUM | | SECOND END SPLINE QUANTITY | 10 | | SECOND END STYLE | SPLINED (STRAIGHT) | | SPECIAL FEATURES | ENGINEERING REPORT ERB831-4200-MF01961 STATES: PN 26 FULL SPLINE LENGTH ON ONE END BE INCREASED TO 2.25", AND THEN THE OVERALL SHAFT LENGTH CAN BE DETERMINED AT INSTALLATION. |
|
|