5342-01-507-7906 ANODE,CORROSION PREVENTIVE Index 4140-01-507-7908 FAN,TUBEAXIAL

National Stock Number:
3040-01-507-7907

Federal Supply Class:
3040

National Item Identification Number:
015077907

Description:
SHAFT,SHOULDERED

Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.


Manufacturer Information:
479278388WOODWARD CONTROLS INC.
SA-263778388WOODWARD CONTROLS INC.


Techincal Specification:
SECOND END SPLINE QUANTITY2
STEP QUANTITY2
SUPPLEMENTARY FEATURESELECTROLESS NICKEL PLATE 0.0003 - 0.0005 THICK; 1ST END CHAMFERED 0.031 X 45 DEGREES
CRITICALITY CODE JUSTIFICATIONAMDL AND AMDG AND AMFZ
END SIMILARITYNOT IDENTICAL
FIRST END EXTERNAL KEYWAY LENGTH0.844 INCHES NOMINAL
FIRST END DIAMETER0.3020 INCHES MINIMUM AND 0.3220 INCHES MAXIMUM
FIRST END KEYWAY DEPTH0.0545 INCHES MINIMUM AND 0.0665 INCHES MAXIMUM
FIRST END KEYWAY WIDTH0.0690 INCHES MINIMUM AND 0.7700 INCHES MAXIMUM
FIRST END STYLEFLAT KEYWAY
LARGEST STEP DIAMETER0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM
MATERIALSTEEL COMP 1117
PART NAME ASSIGNED BY CONTROLLING AGENCYDRIVE TANG-FEMALE MINI-GEN SIGNAL GENERATOR
PROPRIETARY CHARACTERISTICSPACS
OVERALL LENGTH1.302 INCHES MINIMUM AND 1.322 INCHES MAXIMUM
SECOND END DIAMETER0.1620 INCHES MINIMUM AND 0.1680 INCHES MAXIMUM
SECOND END STYLESPLINED (STRAIGHT)
SECOND END SPLINE LENGTH0.125 INCHES MINIMUM AND 0.145 INCHES MAXIMUM
SECOND END SPLINE MAJOR DIAMETER0.2300 INCHES MINIMUM AND 0.2460 INCHES MAXIMUM
SECOND END SPLINE MINOR DIAMETER0.1620 INCHES MINIMUM AND 0.1680 INCHES MAXIMUM


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us