|
|
|
National Stock Number:
3040-01-508-4086
Federal Supply Class:
3040
National Item Identification Number:
015084086
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 176507 | 98523 | JERED LLC | | 20739010 REV D FN 4 | 98523 | JERED LLC | | 20739027 | 98523 | JERED LLC |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END SPLINE QUANTITY | 16 | | FIRST END STYLE | CIRCULAR GROOVED, SPLINED (STRAIGHT) AND EXTERNALLY THREADED | | LARGEST STEP DIAMETER | 1.181 INCHES NOMINAL | | MATERIAL | STEEL | | PART NAME ASSIGNED BY CONTROLLING AGENCY | SHAFT, DRIVE | | PROPRIETARY CHARACTERISTICS | PACS | | OVERALL LENGTH | 6.840 INCHES NOMINAL | | SPECIAL FEATURES | SECOND END: INTERNALLY THREADED THRU 1.66 IN. WITH KEY, INSIDE DIAM. 0.55 IN, OS DIAM. 1.28 IN., INSIDE HOLE WITH KEYWAY IS .554 IN. LONG. KEYWAY IS .13 IN. WIDE. NEXT HIGHER ASSY. 20739010, WEIGHT: 2.43 LBS. | | STEP QUANTITY | 4 |
|
|