|
|
|
National Stock Number:
3040-01-510-8342
Federal Supply Class:
3040
National Item Identification Number:
015108342
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 802-LPD17-624-001 PC 3 | 53711 | NAVAL SEA SYSTEMS COMMAND | | 802-LPD17-624-001-3 | 53711 | NAVAL SEA SYSTEMS COMMAND | | LPD17-624-001 | 53711 | NAVAL SEA SYSTEMS COMMAND |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 0.7495 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM | | FIRST END STYLE | PLAIN | | LARGEST STEP DIAMETER | 0.997 INCHES MINIMUM AND 1.000 INCHES MAXIMUM | | OVERALL LENGTH | 7.875 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A276 NATIONAL SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL CORROSION RESISTING | | PART NAME ASSIGNED BY CONTROLLING AGENCY | SPINDLE | | SECOND END DIAMETER | 0.8075 INCHES MINIMUM AND 0.8125 INCHES MAXIMUM | | SECOND END EXTERNAL THREAD LENGTH | 1.1250 INCHES NOMINAL | | SECOND END STYLE | EXTERNAL THREADED | | STEP QUANTITY | 5 | | SURFACE FINISH | 125.0 MICROINCHES |
|
|