|
|
|
National Stock Number:
3040-01-511-2361
Federal Supply Class:
3040
National Item Identification Number:
015112361
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 243-6985876-36 | 53711 | NAVAL SEA SYSTEMS COMMAND | | 6985876 | 53711 | NAVAL SEA SYSTEMS COMMAND | | H713-0105-36 | 96169 | ELECTRIC BOAT CORPORATION | | H7130105-36 | 96169 | ELECTRIC BOAT CORPORATION | | H7130105A-36 | 96169 | ELECTRIC BOAT CORPORATION | | H7130105A-36A | 96169 | ELECTRIC BOAT CORPORATION |
|
Techincal Specification:
| END SIMILARITY | IDENTICAL | | FIRST END EXTERNAL THREAD LENGTH | 3.750 INCHES NOMINAL | | FIRST END DIAMETER | 3.2500 INCHES NOMINAL | | FIRST END STYLE | EXTERNAL THREADED | | LARGEST STEP DIAMETER | 3.250 INCHES MINIMUM AND 3.280 INCHES MAXIMUM | | OVERALL LENGTH | 36.190 INCHES NOMINAL | | PART NAME ASSIGNED BY CONTROLLING AGENCY | BOLT, STUD | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-24093 CLASS C, TYPE 1 MIL SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | NICKEL ALLOY | | STEP QUANTITY | 5 | | SURFACE FINISH | 63.0 MICROINCHES |
|
|