|
|
|
National Stock Number:
3040-01-511-3036
Federal Supply Class:
3040
National Item Identification Number:
015113036
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| A108128 | 15617 | STRAINSERT COMPANY | | A108128-101-11 | 3CX85 | GENERAL DYNAMICS MISSION SYSTEMS, INC. | | CPRI-FB(Q15487E) | 15617 | STRAINSERT COMPANY | | A109092-101-11, ITEM 2 | 3CX85 | GENERAL DYNAMICS MISSION SYSTEMS, INC. | | A109092-101-11, ITEM 2 | 3CX89 | GENERAL DYNAMICS MISSION SYSTEMS, INC. | | A108128-101-11 | 3CX89 | GENERAL DYNAMICS MISSION SYSTEMS, INC. | | Q15487-500-1F-C | 15617 | STRAINSERT COMPANY |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 1.0000 INCHES NOMINAL | | FIRST END STYLE | PLAIN | | LARGEST STEP DIAMETER | 3.750 INCHES NOMINAL | | OVERALL LENGTH | 15.400 INCHES NOMINAL | | PART NAME ASSIGNED BY CONTROLLING AGENCY | CLEVIS PIN | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-N-286F K-500 FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | NICKEL ALLOY K-500 | | SECOND END DIAMETER | 3.7500 INCHES NOMINAL | | SECOND END STYLE | PLAIN | | SPECIAL FEATURES | FORCE SENSING LOAD CLEVIS PIN 0 TO 7000 LB. 4-20 MA OUTPUT; 13 TO 28 V DC INPUT. | | STEP QUANTITY | 7 | | SURFACE FINISH | 32.0 MICROINCHES |
|
|