|
|
|
National Stock Number:
3040-01-511-4426
Federal Supply Class:
3040
National Item Identification Number:
015114426
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 5793702 | 53711 | NAVAL SEA SYSTEMS COMMAND | | 6392498 | 53711 | NAVAL SEA SYSTEMS COMMAND | | 6392498-01 FIND 4 | 53711 | NAVAL SEA SYSTEMS COMMAND |
|
Techincal Specification:
| END SIMILARITY | IDENTICAL | | FIRST END GROOVE DIAMETER | 1.0550 INCHES MINIMUM AND 1.0630 INCHES MAXIMUM | | FIRST END GROOVE WIDTH | 0.0560 INCHES MINIMUM AND 0.0600 INCHES MAXIMUM | | FIRST END DIAMETER | 1.1220 INCHES MINIMUM AND 1.1225 INCHES MAXIMUM | | FIRST END DISTANCE FROM END TO GROOVE | 0.3060 INCHES NOMINAL | | FIRST END STYLE | CIRCULAR GROOVED | | LARGEST STEP DIAMETER | 2.250 INCHES NOMINAL | | OVERALL LENGTH | 33.130 INCHES NOMINAL | | MATERIAL | NICKEL ALLOY | | PART NAME ASSIGNED BY CONTROLLING AGENCY | SHAFT, CONTROL | | STEP QUANTITY | 11 |
|
|