|
|
|
National Stock Number:
3040-01-551-6212
Federal Supply Class:
3040
National Item Identification Number:
015516212
Description:
AXLE,SHOULDERED
Detail:
An axle having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers), periphersl flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or sholders may be machined to accommodate bearings couplings and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to transmit motion see SHAFT(1), SHOULDER. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1),STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 8H-A31438 | 064S4 | BAE SYSTEMS LAND & ARMAMENTS L.P. | | TYUW11035A | 064S4 | BAE SYSTEMS LAND & ARMAMENTS L.P. |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 22.0 MILLIMETERS NOMINAL | | FIRST END INTERNAL THREAD LENGTH | 15.0 MILLIMETERS NOMINAL | | FIRST END STYLE | INTERNAL THREADED | | LARGEST STEP DIAMETER | 22.0 MILLIMETERS NOMINAL | | MATERIAL | STEEL CORROSION RESISTING | | PART NAME ASSIGNED BY CONTROLLING AGENCY | ELEVATION PIVOT | | PROPRIETARY CHARACTERISTICS | PACS | | OVERALL LENGTH | 142.0 MILLIMETERS NOMINAL | | SECOND END DIAMETER | 18.0 MILLIMETERS NOMINAL | | SECOND END STYLE | PLAIN | | SPECIAL FEATURES | STAINLESS STEEL; FIRST END HAS OVAL FLANGE WITH ONE BOLT HOLE; SHAFT HAS THREE DIAMETERS, 18, 20, AND 22 MM | | STEP QUANTITY | 2 |
|
|