|
|
|
National Stock Number:
3040-01-551-7868
Federal Supply Class:
3040
National Item Identification Number:
015517868
Description:
AXLE,SHOULDERED
Detail:
An axle having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers), periphersl flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or sholders may be machined to accommodate bearings couplings and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to transmit motion see SHAFT(1), SHOULDER. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1),STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 8H-A31361 | 064S4 | BAE SYSTEMS LAND & ARMAMENTS L.P. | | TYUW11010A | 064S4 | BAE SYSTEMS LAND & ARMAMENTS L.P. |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 0.7500 INCHES NOMINAL | | FIRST END STYLE | PLAIN | | LARGEST STEP DIAMETER | 45.0 MILLIMETERS NOMINAL | | MATERIAL | STEEL CORROSION RESISTING | | PART NAME ASSIGNED BY CONTROLLING AGENCY | TRAVERSE ACTUATOR PIVOT | | PROPRIETARY CHARACTERISTICS | PACS | | OVERALL LENGTH | 185.5 MILLIMETERS NOMINAL | | SPECIAL FEATURES | ALLOY STAINLESS 316 3INCH ROD; FIRST END HAS .75-16 UNF 2A THREADS; SECOND END HAS FLAT FACE FLANGE WITH SIX 7MM THRU HOLES; SHAFT HAS FIVE DIAMETERS .75 INCH, 26, 31, 32, 45 MM | | SECOND END DIAMETER | 51.0 MILLIMETERS NOMINAL | | SECOND END INTERNAL THREAD LENGTH | 12.0 MILLIMETERS NOMINAL | | SECOND END STYLE | INTERNAL THREADED | | STEP QUANTITY | 5 |
|
|