|
|
|
National Stock Number:
3040-01-551-9144
Federal Supply Class:
3040
National Item Identification Number:
015519144
Description:
SHAFT,STRAIGHT
Detail:
A straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for jubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.
|
Manufacturer Information:
| 4F19311-101A | 98897 | LOCKHEED MARTIN CORP |
|
Techincal Specification:
| END SIMILARITY | IDENTICAL | | FIRST END DIAMETER | 1.4985 INCHES MINIMUM AND 1.5000 INCHES MAXIMUM | | FIRST END SPLINE LENGTH | 1.4000 INCHES MINIMUM AND 1.4200 INCHES MAXIMUM | | FIRST END SPLINE MAJOR DIAMETER | 1.4970 INCHES MINIMUM AND 1.5000 INCHES MAXIMUM | | FIRST END SPLINE MINOR DIAMETER | 1.3982 INCHES MINIMUM AND 1.4063 INCHES MAXIMUM | | FIRST END SPLINE QUANTITY | 47 | | FIRST END STYLE | SPLINED (STRAIGHT) | | OVERALL LENGTH | 8.120 INCHES MINIMUM AND 8.140 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5659 ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL CORROSION RESISTING | | SPECIAL FEATURES | 2 HOLES, ONE IN EACH END THRU SPLINS, BOTH SAME SIDE, HOLE DIA .218" MIN .224" MAX, CENTER TO CENTER 6.93" +.010" -.000", CENTER TO END .700" +/-.010", INSIDE DIA 1.000" +/-.010" | | PART NAME ASSIGNED BY CONTROLLING AGENCY | SHAFT |
|
|