5305-01-558-3894 SCREW,MACHINE Index 1560-01-558-3896 BRACKET,STRUCTURAL COMPONENT,AIR

National Stock Number:
3040-01-558-3895

Federal Supply Class:
3040

National Item Identification Number:
015583895

Description:
SHAFT,STRAIGHT

Detail:
A straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for jubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.


Manufacturer Information:
4F19311-103A98897LOCKHEED MARTIN CORP


Techincal Specification:
END SIMILARITYIDENTICAL
FIRST END DIAMETER1.4970 INCHES MINIMUM AND 1.5000 INCHES MAXIMUM
FIRST END SPLINE LENGTH1.400 INCHES MINIMUM AND 1.420 INCHES MAXIMUM
FIRST END SPLINE MAJOR DIAMETER1.4970 INCHES MINIMUM AND 1.5000 INCHES MAXIMUM
FIRST END SPLINE MINOR DIAMETER1.3982 INCHES MINIMUM AND 1.4063 INCHES MAXIMUM
FIRST END SPLINE QUANTITY47
FIRST END STYLESPLINED (STRAIGHT)
OVERALL LENGTH9.120 INCHES MINIMUM AND 9.140 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 5659 ASSN STD SINGLE MATERIAL RESPONSE
MATERIALSTEEL
SPECIAL FEATURES2 HOLES ONE IN EACH END THRU SPLIINES, DIA OF BOTH HOLES IS 0.218 TO 0.224, CENTER TO CENTER BETWEEN HOLES IS 6.930 TO 6.940, HOLE LOCATED 1.700 FROM 2ND END AND 1.410 FROM 1ST END
PART NAME ASSIGNED BY CONTROLLING AGENCYSHAFT-DRIVE ARM CREW ENTRY DOOR
SECOND END DIAMETER1.4970 INCHES MINIMUM AND 1.5000 INCHES MAXIMUM
SECOND END SPLINE LENGTH2.400 INCHES MINIMUM AND 2.420 INCHES MAXIMUM
SECOND END SPLINE MAJOR DIAMETER1.4970 INCHES MINIMUM AND 1.5000 INCHES MAXIMUM
SECOND END SPLINE MINOR DIAMETER1.3982 INCHES MINIMUM AND 1.4063 INCHES MAXIMUM
SECOND END SPLINE QUANTITY47
SURFACE FINISH125.0 MICROINCHES


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us