|
|
|
National Stock Number:
3040-01-617-2043
Federal Supply Class:
3040
National Item Identification Number:
016172043
Description:
CYLINDER ASSEMBLY,ACTUATING,LINE
Detail:
A cylinder containing a piston and other component parts designed to develop linear motion required to operate a given object(s) with energy generated from either pneumatic or hydraulic pressure(s). See also CYLINDER, ACTUATING, LINEAR. Do not use if a more specific name applies.
|
Manufacturer Information:
| CRC-2521 | 5C255 | CRC MANUFACTURING INC. | | CRC-2521 | 8K266 | PRICE ENGINEERING COMPANY, LLC | | F449888 | 34712 | LAKE SHORE SYSTEMS, INC. |
|
Techincal Specification:
| DESIGN CHARACTERISTICS | SINGLE ACTING SINGLE CYLINDER | | BODY MATERIAL | STEEL | | BORE DIAMETER | 2.5 INCHES NOMINAL | | COMPRESSED LENGTH | 14.63 INCHES NOMINAL | | ENVIRONMENTAL PROTECTION | WATER, SALT AND WEATHERPROOF | | EXTENDED LENGTH | 21.13 INCHES NOMINAL | | FIRST END OUTSIDE DIAMETER | 0.75 INCHES NOMINAL SMALLEST WORKING END | | FIRST PISTON ROD END STYLE | EXTERNAL THREADED SMALLEST WORKING END | | INTEGRAL VALVE OPERATION METHOD | HYDRAULIC | | PART NAME ASSIGNED BY CONTROLLING AGENCY | DOGGING CYLINDER STERN DOOR | | PRESSURE RATING | 2500.0 POUNDS PER SQUARE INCH NOMINAL | | PROPRIETARY CHARACTERISTICS | PACS | | SECOND END HOLE DIAMETER | 0.78 INCHES NOMINAL LARGEST WORKING END | | SECOND END THICKNESS AT MOUNTING HOLES | 0.75 INCHES NOMINAL LARGEST WORKING END | | SPECIAL FEATURES | WEIGHT:23.70 LBS,CYLINDER SPECIFICATIONS: STROKE 6.5INCHES, FLUID FLOW RATE TO CYLINDER: 1.5 GPM, TIME REQ'D TO EXTEND: 10 SEC, TIME REQ'D TO RETRACT: 10 SEC, ROD DIAMETER: 1 INCH, PORTS: NUMBER 8 O-RING BOSS, OPERATING PRESSURES: EXTEND 2,500PSI, RETRACT 2,500PSI, BURST PRESSURE: 10,000 PSI (MIN) 4:1 FACTOR OF SAFTY, SYSTEM RELIEF VALVE SETTING: 2,800(MAX) ESTIMATED RETRACTINGLOAD: 3,302 LBS, MAX BUCKLING LOAD RETRACTED: 20,000LBS, MAX BUCKLING LOAD EXTENDED: 10,000 LBS, HYDOSTATIC TEST AT 4,500 PSI ( WITH ROD EXTENDED AND RETRACTED, OPERATIONAL TEST AT 2,500 PSI(PUSH/PULL) WITHOUT THE COUNTER BALANCE VALVE. | | TEST DATA DOCUMENT | 34712-F449888 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
|
|