| FIRST PISTON ROD END THREAD QUANTITY PER INCH | 12 SMALLEST WORKING END |
| FIRST PISTON ROD END THREAD SERIES DESIGNATOR | UNF SMALLEST WORKING END |
| INTEGRAL VALVE OPERATION METHOD | HYDRAULIC |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | RAMP LOCK CYLINDER |
| PISTON ROD END SIMILARITY | NOT IDENTICAL |
| PRESSURE RATING | 2500.0 POUNDS PER SQUARE INCH NOMINAL |
| PROPRIETARY CHARACTERISTICS | PACS |
| OVERALL DIAMETER | 6.0 INCHES NOMINAL |
| SECOND END HOLE DIAMETER | 1.0 INCHES NOMINAL LARGEST WORKING END |
| SECOND END LARGEST INSIDE DIAMETER | 1.0 INCHES NOMINAL LARGEST WORKING END |
| SECOND END FORK DEPTH | 2.63 INCHES NOMINAL LARGEST WORKING END |
| SECOND END FORK SPAN WIDTH | 1.5 INCHES NOMINAL LARGEST WORKING END |
| SECOND END FORK WIDTH | 2.0 INCHES NOMINAL LARGEST WORKING END |
| SECOND END THICKNESS AT MOUNTING HOLES | 0.75 INCHES NOMINAL LARGEST WORKING END |
| SECOND PISTON ROD END STYLE | FORK TYPE (CLEVIS) |
| SPECIAL FEATURES | WEIGHT:76.29 LBS, CYLINDER SPECIFICATIONS: STROKE: 5.63 INCHES, FLUID FLOW RATE TO CYLINDER: 3 GPM, TIME REQ'D TO EXTEND 30 SECONDS, TIME TO RETRACT 25 SECONDS, PORTS NUMBER 12 O-RING BOSS, OPERATING PRESSURES: EXTEND 2,500 PSI (MAX) RETRACT 2,500 PSI, BURST PRESSURE: 10,000 PSI(4 TO 1 FACTOR OF SAFTY)SYSTEM RELIEF VALVE SETTING: 2,800 PSI (MAX), ESTIMATED RETRACTING LOAD: 9,700 LBS(MAX),MAX. BUCKLING LOAD RETRACTED, 63,135 LBS, MAX BUCKLING LOAD EXTEND50,000 LBS, HYDROSTATIC TEST AT 4,500 PSI ( WITH ROD EXTEND AND RETRACTED) OPERATIONAL TEST 2,500 PSI (PUSH/PULL) WITH OUT THE COUNTER BALANCE VALVE. |
| VOLTAGE RATING IN VOLTS | 115.0 AC |
| TEMP RATING | -40.0 DEG FAHRENHEIT AND 170.0 DEG FAHRENHEIT |
| TEST DATA DOCUMENT | 34712-F149918 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| DESIGN CHARACTERISTICS | SINGLE ACTING SINGLE CYLINDER |
| BODY MATERIAL | STEEL |
| BODY OUTSIDE DIAMETER | 4.0 INCHES NOMINAL |
| BORE DIAMETER | 3.0 INCHES NOMINAL |
| COMPRESSED LENGTH | 19.5 INCHES NOMINAL |
| ENVIRONMENTAL PROTECTION | WATER, SALT AND WEATHERPROOF |
| EXTENDED LENGTH | 25.13 INCHES NOMINAL |
| FIRST END OUTSIDE DIAMETER | 2.0 INCHES NOMINAL SMALLEST WORKING END |
| FIRST PISTON ROD END STYLE | EXTERNAL THREADED SMALLEST WORKING END |
| FIRST PISTON ROD END THREAD CLASS | 1.750-12UNF SMALLEST WORKING END |
| FIRST PISTON ROD END THREAD DIAMETER | 1.750 INCHES NOMINAL SMALLEST WORKING END |
| FIRST PISTON ROD END THREAD DIRECTION | RIGHT-HAND SMALLEST WORKING END |