|
|
|
National Stock Number:
3040-20-003-6768
Federal Supply Class:
3040
National Item Identification Number:
200036768
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 22214 | 38335 | PULLMASTER WINCH CORPORATION |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END PITCH DIAMETER | 0.8750 INCHES NOMINAL | | FIRST END PRESSURE ANGLE | 30.0 DEGREES NOMINAL | | FIRST END SPLINE LENGTH | 0.880 INCHES MINIMUM AND 0.887 INCHES MAXIMUM | | FIRST END SPLINE MAJOR DIAMETER | 0.934 INCHES NOMINAL | | FIRST END STYLE | EXTERNAL THREADED | | MATERIAL | STEEL | | OVERALL LENGTH | 6.105 INCHES MINIMUM AND 6.110 INCHES MAXIMUM | | SECOND END DIAMETER | 1.060 INCHES NOMINAL | | SECOND END STYLE | INTERNAL THREADED |
|
|