|
|
|
National Stock Number:
3040-21-907-6830
Federal Supply Class:
3040
National Item Identification Number:
219076830
Description:
LEVER,REMOTE CONTROL
Detail:
A rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL.
|
Manufacturer Information:
| 10513713 | 56161 | GENERAL DYNAMICS LAND SYSTEMS - CANADA CORPORATION |
|
Techincal Specification:
| BORE TYPE | SPLINED | | CENTER TO CENTER DISTANCE BETWEEN LINK AND SHAFT HOLES | 175.0 MILLIMETERS NOMINAL | | FEATURES PROVIDED | COUNTERBORE AND LINK END THREADED HOLE | | LINK END HOLE DIAMETER | 22.0 MILLIMETERS NOMINAL | | MAJOR DIAMETER | 40.0 MILLIMETERS NOMINAL | | III MATERIAL | STEEL | | MINOR DIAMETER | 36.0 MILLIMETERS NOMINAL | | OVERALL WIDTH | 68.0 MILLIMETERS NOMINAL | | SHAFT END THICKNESS | 43.0 MILLIMETERS NOMINAL | | SHAFT SECURING METHOD | SPLINE | | SPECIAL FEATURES | LSHAFT END EXTENDED TO INCLUDE A M1QX1.5 THREADED HOLE 14.25MM FROM END,ONE TOOTH GAP (4 TEETH) 36 DEG EITHER WAY FROM C/L AT SPLIT END, TOOTH MARKED AT 73 DEG FROM C/L AT LINK END; OFFSET HEIGHT: 19.0 MM NOMINAL | | SPLINE QUANTITY | 36 | | STYLE DESIGNATOR | TWO HOLES LINK END, CLAMP TYPE SHAFT END | | SURFACE TREATMENT | PAINT |
|
|