|
|
|
National Stock Number:
3040-99-509-7389
Federal Supply Class:
3040
National Item Identification Number:
995097389
Description:
SHAFT,STRAIGHT
Detail:
A straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for jubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.
|
Manufacturer Information:
| 3A326-0482 | K9075 | IPECO HOLDINGS LIMITED |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DISTANCE FROM HOLE CENTER TO END | 0.6200 INCHES MINIMUM AND 0.6400 INCHES MAXIMUM | | FIRST END DIAMETER | 0.3720 INCHES MINIMUM AND 0.3750 INCHES MAXIMUM | | FIRST END HOLE DIAMETER | 0.1550 INCHES MINIMUM AND 0.1600 INCHES MAXIMUM | | FIRST END STYLE | UNTHREADED CROSS DRILLED | | MATERIAL DOCUMENT AND CLASSIFICATION | L168-T6 NATIONAL SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | ALUMINUM ALLOY | | III PART NAME ASSIGNED BY CONTROLLING AGENCY | SHAFT-VERTICAL | | OVERALL LENGTH | 5.0720 INCHES MINIMUM AND 5.0820 INCHES MAXIMUM | | SECOND END DIAMETER | 0.3720 INCHES MINIMUM AND 0.3750 INCHES MAXIMUM | | SECOND END HOLE DIAMETER | 0.1550 INCHES MINIMUM AND 0.1600 INCHES MAXIMUM | | SECOND END DISTANCE FROM HOLE CENTER TO END | 0.2500 INCHES NOMINAL | | SECOND END STYLE | UNTHREADED CROSS DRILLED | | SPECIAL FEATURES | RH | | SURFACE FINISH | 63.0 MICROINCHES |
|
|