|
|
National Stock Number: 3040-99-756-0446
Federal Supply Class: 3040
National Item Identification Number: 997560446
Description: SHAFT,SHOULDERED
Detail: A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
G412/4574 ITEM 41 | K7705 | KNDS DEFENCE UK LIMITED | G412/4574/41 | K7705 | KNDS DEFENCE UK LIMITED |
|
Techincal Specification:
END SIMILARITY | NOT IDENTICAL | FIRST END DIAMETER | 29.85 MILLIMETERS MINIMUM AND 29.90 MILLIMETERS MAXIMUM | FIRST END STYLE | PLAIN | LARGEST STEP DIAMETER | 43.50 MILLIMETERS NOMINAL | MATERIAL | ALUMINUM ALLOY | PART NAME ASSIGNED BY CONTROLLING AGENCY | LATCH PIN | OVERALL LENGTH | 203.00 MILLIMETERS NOMINAL | SECOND END DIAMETER | 16.00 MILLIMETERS NOMINAL | SECOND END HOLE DIAMETER | 6.00 MILLIMETERS MINIMUM AND 6.10 MILLIMETERS MAXIMUM | SECOND END DISTANCE FROM HOLE CENTER TO END | 8.00 MILLIMETERS NOMINAL | SECOND END STYLE | UNTHREADED CROSS DRILLED | STEP QUANTITY | 4 |
|
|