|
|
|
National Stock Number:
3110-00-080-7606
Federal Supply Class:
3110
National Item Identification Number:
000807606
Description:
BEARING,BALL,ANNULAR
Detail:
A cylindrical device in which the inner or outer ring turns upon a single or double row of hardened balls which roll easily between the two rings, thus minimizing friction. For items with faces specially ground for duplex mounting see BEARING, BALL, DUPLEX. Excludes BEARING, BALL, AIRFRAME.
|
Manufacturer Information:
| 1-300-006 | 99193 | HONEYWELL INTERNATIONAL INC. | | 1-300-006-01 | 78U39 | OZARK AEROWORKS LLC | | 1906S300 | 38443 | SKF USA INC. | | 454886 | 52676 | SKF USA INC. | | 1-300-006-01 | 99193 | HONEYWELL INTERNATIONAL INC. | | 1-300-006-02 | 99193 | HONEYWELL INTERNATIONAL INC. | | D1-31520 | 38443 | SKF USA INC. | | 76050 | 52676 | SKF USA INC. |
|
Techincal Specification:
| BORE DIAMETER | 30.00 MILLIMETERS NOMINAL | | BORE SHAPE | STRAIGHT | | INTERNAL CLEARANCE | 0.0035 INCHES MINIMUM AXIAL AND 0.0080 INCHES MAXIMUM AXIAL AND 0.0003 INCHES MINIMUM RADIAL AND 0.0011 INCHES MAXIMUM RADIAL | | LOAD DIRECTION | ANGULAR | | OVERALL OUTSIDE DIAMETER | 47.00 MILLIMETERS NOMINAL | | OVERALL WIDTH | 9.00 MILLIMETERS NOMINAL | | RETAINER FABRICATION METHOD | MACHINED | | STANDARD TOLERANCE DESIGNATION | ABEC NO.3 | | STYLE DESIGNATOR | 4 POINT BALL CONTACT, SOLID INNER AND OUTER RINGS, NON-SEPARABLE | | SPECIAL FEATURES | STABILIZED FOR OPERATION FROM M65 DEG F TO P250 DEG F,C SCALE 58 MIN,61 MAX ROCKWELL HARDNESS RINGS AND BALL,SURFACE FINISH ID INNER RING 16 TO 20 MICROINCHES AA,OD OUTER RING 16 MICROINCHES AA,RETAINER POCKET 30 TO 50 MICROINCHES AA,RACEWAYS 6 TO 13 MICROINCHES AA | | SURFACE FINISH | GROUND | | TEST DATA DOCUMENT | +6903-91547 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
|
|