|
|
|
National Stock Number:
3110-00-133-3379
Federal Supply Class:
3110
National Item Identification Number:
001333379
Description:
BEARING,BALL,DUPLEX
Detail:
Two single row annular ball bearings selected dimensionally to be a matched pair or set. The ring faces have been specially ground to specified offsets that will produce predetermined preload when mounted. May include a single row angular contact bearing with faces specially ground for duplex mounting.
|
Manufacturer Information:
| 205-040-245 | 97499 | BELL TEXTRON INC | | 205-040-245-001 | 97499 | BELL TEXTRON INC | | 205-040-245-1 | 21335 | TIMKEN CO | | 3AAMM9324WI3NGSRDUE9831 | 21335 | TIMKEN CO | | 205-040-245-1 | 38443 | SKF USA INC. | | 205-040-245-1 | 97499 | BELL TEXTRON INC | | 71924D1B | 38443 | SKF USA INC. |
|
Techincal Specification:
| MATERIAL | STEEL BALL | | STEEL INNER RING | | STEEL OUTER RING | | PLASTIC RETAINER | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6490 ASSN STD SINGLE MATERIAL RESPONSE BALL | | AMS 6490 ASSN STD SINGLE MATERIAL RESPONSE INNER RING | | AMS 6490 ASSN STD SINGLE MATERIAL RESPONSE OUTER RING | | 205-040-245,97499 MFR REF SINGLE MATERIAL RESPONSE RETAINER | | STYLE DESIGNATOR | COUNTERBORED OUTER RINGS, NON-SEPARABLE, BACK TO BACK MOUNTING | | OVERALL WIDTH | 44.00 MILLIMETERS NOMINAL | | BORE DIAMETER | 120.00 MILLIMETERS NOMINAL | | OVERALL OUTSIDE DIAMETER | 170.00 MILLIMETERS NOMINAL | | STANDARD TOLERANCE DESIGNATION | ABEC NO.5 | | SURFACE FINISH | GROUND | | RETAINER FABRICATION METHOD | MACHINED | | LOAD DIRECTION | ANGULAR | | INTERNAL FIT-UP DESIGNATION | STANDARD | | BEARING PRELOAD RATING | 22.0 POUNDS NOMINAL | | SPECIAL FEATURES | BEARINGS MARKED WITH SAME SER NO.,BEARINGS STABILIZED FOR OPERATION FROM M65 DEG F TO P500 DEG F | | TEST DATA DOCUMENT | 21335-APS33 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). AND | | 21335-APS36-A SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). AND | | 38443-AQCP2-A SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). AND | | 38443-AQCP9-A SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). | | SPEC/STD CONTROLLING DATA | | | MANUFACTURERS CODE | 97499 | | MFR SOURCE CONTROLLING REFERENCE | 205-040-245 |
|
|