| MATERIAL | STEEL COMP E52100 BALL |
| STEEL COMP E52100 INNER RING |
| STEEL COMP 4130 OUTER RING |
| PLASTIC POLYTETRAFLUOROETHYLENE SEAL |
| STEEL COMP 4130 SHAFT |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-7420 MIL SPEC SINGLE MATERIAL RESPONSE BALL |
| MIL-S-7420 MIL SPEC SINGLE MATERIAL RESPONSE INNER RING |
| MIL-S-6758 MIL SPEC SINGLE MATERIAL RESPONSE OUTER RING |
| AMS 3652 ASSN STD SINGLE MATERIAL RESPONSE OR |
| AMS 3666 ASSN STD SINGLE MATERIAL RESPONSE SEAL |
| MIL-S-6758 MIL SPEC SINGLE MATERIAL RESPONSE SHAFT |
| STYLE DESIGNATOR | DOUBLE ROW, STAGGERED, BALL |
| SHANK STYLE | INTERNALLY THREADED |
| ALIGNMENT TYPE | SELF-ALIGNING |
| SELF-ALIGNMENT ANGLE | 10.00 DEGREES NOMINAL |
| OVERALL LENGTH | 2.3240 INCHES MINIMUM AND |
| 2.3640 INCHES MAXIMUM |
| BORE DIAMETER | 0.2497 INCHES MINIMUM AND |
| 0.2500 INCHES MAXIMUM |
| OVERALL OUTSIDE DIAMETER | 0.9280 INCHES MINIMUM AND |
| 0.9480 INCHES MAXIMUM |
| OUTER RING WIDTH | 0.4280 INCHES MINIMUM AND |
| 0.4480 INCHES MAXIMUM |
| INNER RING WIDTH | 0.5870 INCHES MINIMUM AND |
| 0.5930 INCHES MAXIMUM |
| LENGTH FROM BORE CENTER TO SHANK END | 1.8650 INCHES MINIMUM AND |
| 1.8850 INCHES MAXIMUM |
| SHANK DIAMETER | 0.6150 INCHES MINIMUM AND |
| 0.6350 INCHES MAXIMUM |
| SHANK THREAD LENGTH | 1.0940 INCHES MINIMUM AND |
| 1.1560 INCHES MAXIMUM |
| THREAD SERIES DESIGNATOR | UNJF |
| NOMINAL THREAD SIZE | 0.437 INCHES |
| THREAD QUANTITY PER INCH | 20 |
| THREAD CLASS | 3B |
| THREAD DIRECTION | RIGHT-HAND |
| LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-G-81322 MIL SPEC SINGLE MATERIAL RESPONSE |
| SEAL QUANTITY | 2 |
| BEARING SEAL TYPE | CONTACT |
| SELF-ALIGNMENT LOCATION | INTERNAL |
| LUBRICATION MATERIAL | GREASE |
| SPEC/STD CONTROLLING DATA | |
| MANUFACTURERS CODE | 96906 |
| DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | MS21153-8 |