|
|
|
National Stock Number:
3110-00-253-1940
Federal Supply Class:
3110
National Item Identification Number:
002531940
Description:
BEARING,BALL,ANNULAR
Detail:
A cylindrical device in which the inner or outer ring turns upon a single or double row of hardened balls which roll easily between the two rings, thus minimizing friction. For items with faces specially ground for duplex mounting see BEARING, BALL, DUPLEX. Excludes BEARING, BALL, AIRFRAME.
|
Manufacturer Information:
| 3327502 | 55380 | HATCH & KIRK, INC. | | 5311X3662A | 43334 | GENERAL MOTORS CORP DELCO MORAINE NDH DIV | | 911-68-2-4128-01 | 58626 | FULLER CO COMPTON PLANT |
|
Techincal Specification:
| BORE DIAMETER | 2.1650 INCHES MINIMUM AND 2.1654 INCHES MAXIMUM | | BORE SHAPE | STRAIGHT | | CONTACT ANGLE | 25.0 DEGREES MAXIMUM | | DEPARTURE FROM CITED DESIGNATOR | ONE | | INTERNAL FIT-UP DESIGNATION | STANDARD | | INTERNAL FIT-UP CONTACT ANGULAR DIRECTION | OUTWARD CONVERGENT | | LOAD DIRECTION | ANGULAR | | MATERIAL | STEEL COMP 5140 OVERALL | | OVERALL OUTSIDE DIAMETER | 4.7240 INCHES MINIMUM AND 4.7244 INCHES MAXIMUM | | OVERALL WIDTH | 1.9325 INCHES MINIMUM AND 1.9375 INCHES MAXIMUM | | RETAINER FABRICATION METHOD | PRESSED | | STYLE DESIGNATOR | LOADING GROOVE, NON-SEPARABLE | | SURFACE FINISH | GROUND | | TEST DATA DOCUMENT | 58626-911-68-2-4128-01 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
|
|