| BORE DIAMETER | 6.1021 INCHES MINIMUM AND 6.1024 INCHES MAXIMUM |
| BORE SHAPE | STRAIGHT |
| CONTACT ANGLE | 30.0 DEGREES NOMINAL |
| FLANGE OUTSIDE DIAMETER | 10.0500 INCHES NOMINAL |
| FLANGE WIDTH | 0.2500 INCHES MINIMUM AND 0.2600 INCHES MAXIMUM |
| INNER RING WIDTH | 1.6860 INCHES NOMINAL |
| INTERNAL CLEARANCE | 0.0098 INCHES MINIMUM RADIAL AND 0.0116 INCHES MAXIMUM RADIAL |
| LOAD DIRECTION | ANGULAR |
| OUTER RING OUTSIDE DIAMETER | 8.8577 INCHES MINIMUM AND 8.8583 INCHES MAXIMUM |
| OUTER RING WIDTH | 1.4073 INCHES MINIMUM AND 1.4173 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | PWA 725,97497 MFR REF 1ST MATERIAL RESPONSE BALL |
| MATERIAL DOCUMENT AND CLASSIFICATION | PWA 725,97497 MFR REF 2ND MATERIAL RESPONSE INNER RING |
| MATERIAL DOCUMENT AND CLASSIFICATION | PWA 725,97497 MFR REF 3RD MATERIAL RESPONSE OUTER RING |
| MATERIAL | STEEL BALL |
| MATERIAL | STEEL COMP 4340 RETAINER |
| MATERIAL | STEEL INNER RING |
| MATERIAL | STEEL OUTER RING |
| PRECIOUS MATERIAL | SILVER |
| RETAINER FABRICATION METHOD | MACHINED |
| SPECIAL FEATURES | EACH ASSEMBLY CONTAINS 2 INNER RACES,AN OUTER RACE,A ROLLER CAGE,AND A SET OF ROLLERS |
| STANDARD TOLERANCE DESIGNATION | ABEC NO.7 |
| STYLE DESIGNATOR | NON-LOADING GROOVE, NON-SEPARABLE |
| SURFACE FINISH | GROUND |