| ALIGNMENT TYPE | SELF-ALIGNING |
| BEARING SEAL TYPE | CONTACT |
| BORE DIAMETER | 0.2495 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM |
| CRITICALITY CODE JUSTIFICATION | SUPP |
| FEATURES PROVIDED | ALIGNING RING |
| INNER RING WIDTH | 0.4320 INCHES MINIMUM AND 0.4370 INCHES MAXIMUM |
| LENGTH FROM BORE CENTER TO SHANK END | 1.3650 INCHES MINIMUM AND 1.3950 INCHES MAXIMUM |
| LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-G-81322 MIL SPEC SINGLE MATERIAL RESPONSE |
| LUBRICATION MATERIAL | GREASE |
| OUTER RING WIDTH | 0.3350 INCHES MINIMUM AND 0.3500 INCHES MAXIMUM |
| OVERALL LENGTH | 1.7800 INCHES NOMINAL |
| OVERALL OUTSIDE DIAMETER | 0.8000 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD SINGLE MATERIAL RESPONSE INNER RING |
| MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD SINGLE MATERIAL RESPONSE ROLLER |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 3652 ASSN STD SINGLE MATERIAL RESPONSE SEAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6758 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-8690 MIL SPEC 2ND MATERIAL RESPONSE ROD END BODY |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE SHIELD |
| MATERIAL | PLASTIC SEAL |
| MATERIAL | STEEL COMP 430 SHIELD |
| MATERIAL | STEEL COMP 4130 OR STEEL COMP 8620 ROD END BODY |
| MATERIAL | STEEL COMP E52100 INNER RING |
| MATERIAL | STEEL COMP E52100 ROLLER |
| NOMINAL THREAD SIZE | 0.250 INCHES |
| SEAL QUANTITY | 2 |
| SELF-ALIGNMENT ANGLE | 10.00 DEGREES NOMINAL |
| SELF-ALIGNMENT LOCATION | INTERNAL |
| SHANK DIAMETER | 0.2500 INCHES NOMINAL |
| SHANK STYLE | EXTERNALLY THREADED |
| SHANK THREAD LENGTH | 0.7500 INCHES MINIMUM AND 0.7800 INCHES MAXIMUM |
| SHIELD QUANTITY | 2 |
| SPECIAL FEATURES | NAS513 KEYWAY IN SHANK AND RED NYLON LUBRICATOR FITTING |
| STYLE DESIGNATOR | SINGLE ROW, CONCAVE ROLLERS |
| SUPPLEMENTARY FEATURES | ITEM IS NOT CSI BUT HAS CRITICAL FEATURES SUCH AS TOLERANCE, HEAT TREATMENT, SURFACE FINISH, OR MATERIAL TYPE AND SPECIAL INSP. REQ'S SUCH AS MAGNETIC |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 1,CL 2 FED SPEC SINGLE TREATMENT RESPONSE EXPOSED SURFACES AS MOUNTED |
| SURFACE TREATMENT | CADMIUM EXPOSED SURFACES AS MOUNTED |
| THREAD CLASS | 3A |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD SERIES DESIGNATOR | UNJF |
| THREAD QUANTITY PER INCH | 28 |