| MATERIAL | STEEL COMP E52100 INNER RING |
| STEEL COMP 4620 ROD END BODY |
| STEEL COMP E52100 ROLLER |
| PLASTIC POLYTETRAFLUOROETHYLENE AND |
| GLASS SEAL |
| STEEL CORROSION RESISTING SHIELD |
| STEEL SNAP RING |
| MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD SINGLE MATERIAL RESPONSE INNER RING |
| AISI ASSN STD SINGLE MATERIAL RESPONSE ROD END BODY |
| 66 FED STD SINGLE MATERIAL RESPONSE ROLLER |
| SURFACE TREATMENT | CADMIUM ALL EXTERNAL/EXPOSED METAL SURFACES |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 1,CL 2 FED SPEC SINGLE TREATMENT RESPONSE ALL EXTERNAL/EXPOSED METAL SURFACES |
| STYLE DESIGNATOR | SINGLE ROW, CONCAVE ROLLERS |
| SELF-ALIGNMENT ANGLE | 10.00 DEGREES NOMINAL |
| OVERALL LENGTH | 2.1500 INCHES NOMINAL |
| BORE DIAMETER | 0.2495 INCHES MINIMUM AND |
| 0.2500 INCHES MAXIMUM |
| OVERALL OUTSIDE DIAMETER | 0.7500 INCHES MINIMUM AND |
| 0.8000 INCHES MAXIMUM |
| OUTER RING WIDTH | 0.3350 INCHES MINIMUM AND |
| 0.3500 INCHES MAXIMUM |
| INNER RING WIDTH | 0.4320 INCHES MINIMUM AND |
| 0.4370 INCHES MAXIMUM |
| LENGTH FROM BORE CENTER TO SHANK END | 1.7350 INCHES MINIMUM AND |
| 1.7650 INCHES MAXIMUM |
| SHANK STYLE | EXTERNALLY THREADED |
| SHANK DIAMETER | 0.3750 INCHES MAXIMUM |
| SHANK THREAD LENGTH | 1.1250 INCHES MINIMUM AND |
| 1.1850 INCHES MAXIMUM |
| THREAD SERIES DESIGNATOR | UNJF |
| NOMINAL THREAD SIZE | 0.375 INCHES |
| THREAD QUANTITY PER INCH | 24 |
| THREAD CLASS | 3A |
| THREAD DIRECTION | RIGHT-HAND |
| LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE |
| SHIELD QUANTITY | 2 |
| SEAL QUANTITY | 2 |
| BEARING SEAL TYPE | CONTACT |
| ALIGNMENT TYPE | SELF-ALIGNING |
| SELF-ALIGNMENT LOCATION | INTERNAL |
| SPECIAL FEATURES | WITH MEANS FOR RELUBRICATION,KEYWAY IN SHANK |
| LUBRICATION MATERIAL | GREASE |