| ALIGNMENT TYPE | SELF-ALIGNING |
| BEARING SEAL TYPE | CONTACT |
| BORE DIAMETER | 0.3120 INCHES MINIMUM AND 0.3125 INCHES MAXIMUM |
| INNER RING WIDTH | 0.6820 INCHES MINIMUM AND 0.6870 INCHES MAXIMUM |
| LENGTH FROM BORE CENTER TO SHANK END | 2.3130 INCHES NOMINAL |
| LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE |
| LUBRICATION MATERIAL | GREASE |
| OUTER RING WIDTH | 0.4600 INCHES NOMINAL |
| OVERALL LENGTH | 3.0180 INCHES NOMINAL |
| OVERALL OUTSIDE DIAMETER | 1.4100 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD SINGLE MATERIAL RESPONSE OR AISI ASSN STD SINGLE MATERIAL RESPONSE OR SAE ASSN STD SINGLE MATERIAL RESPONSE ROD END BODY |
| MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD SINGLE MATERIAL RESPONSE OR AISI ASSN STD SINGLE MATERIAL RESPONSE OR SAE ASSN STD SINGLE MATERIAL RESPONSE ROLLER |
| MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD SINGLE MATERIAL RESPONSE OR SAE ASSN STD SINGLE MATERIAL RESPONSE OR AISI ASSN STD SINGLE MATERIAL RESPONSE INNER RING |
| MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD SINGLE MATERIAL RESPONSE OR SAE ASSN STD SINGLE MATERIAL RESPONSE OR AISI ASSN STD SINGLE MATERIAL RESPONSE OUTER RING |
| MATERIAL | RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR SEAL |
| MATERIAL | STEEL CORROSION RESISTING SHIELD |
| MATERIAL | STEEL COMP E4340H OUTER RING |
| MATERIAL | STEEL COMP E4340H ROD END BODY |
| MATERIAL | STEEL COMP E52100 INNER RING |
| MATERIAL | STEEL COMP E52100 ROLLER |
| NOMINAL THREAD SIZE | 0.500 INCHES |
| RETAINER FABRICATION METHOD | MACHINED |
| SEAL QUANTITY | 2 |
| SELF-ALIGNMENT ANGLE | 10.00 DEGREES NOMINAL |
| SELF-ALIGNMENT LOCATION | INTERNAL |
| SHANK DIAMETER | 0.6900 INCHES NOMINAL |
| SHANK STYLE | INTERNALLY THREADED |
| SHANK THREAD LENGTH | 1.3100 INCHES NOMINAL |
| SHIELD QUANTITY | 2 |
| SPECIAL FEATURES | FOUR SLOTS 0.093 IN. W BY 0.069 IN. DEEP CUT IN. END OF SHANK,SHAFT BORE DIA COUNTERSUNK 110 DEG BY 0.500 IN. |
| WIDTH ACROSS FLATS | 0.6900 INCHES NOMINAL |
| STYLE DESIGNATOR | SINGLE ROW, CONCAVE ROLLERS |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 1,CL 2 FED SPEC SINGLE TREATMENT RESPONSE ALL EXTERNAL/EXPOSED METAL SURFACES |
| SURFACE TREATMENT | CADMIUM ALL EXTERNAL/EXPOSED METAL SURFACES |
| THREAD CLASS | 3B |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD SERIES DESIGNATOR | UNJF |
| THREAD QUANTITY PER INCH | 20 |