|
|
|
National Stock Number:
3110-00-602-4231
Federal Supply Class:
3110
National Item Identification Number:
006024231
Description:
BEARING,BALL,ANNULAR
Detail:
A cylindrical device in which the inner or outer ring turns upon a single or double row of hardened balls which roll easily between the two rings, thus minimizing friction. For items with faces specially ground for duplex mounting see BEARING, BALL, DUPLEX. Excludes BEARING, BALL, AIRFRAME.
|
Manufacturer Information:
| 122033-01 | 21335 | TIMKEN CO | | 122033-01 | 35351 | GE AVIATION SYSTEMS LLC | | 77SR3JTHZF5582J9 | 24617 | GENERAL MOTORS CORP | | 79202 | 35351 | GE AVIATION SYSTEMS LLC | | 122033-01 | 70854 | SCHAEFFLER AEROSPACE USA CORP | | 465387-1 | 96214 | RAYTHEON COMPANY | | M33KDD5-3E7344 | 21335 | TIMKEN CO | | MM33K8FS25550 | 21335 | TIMKEN CO | | MV33KDD5-3E7344 | 21335 | TIMKEN CO | | RS77SR3JTHZF5582J9 | 24617 | GENERAL MOTORS CORP | | SR3DTHLR5292 | 24617 | GENERAL MOTORS CORP | | 79202-01 | 35351 | GE AVIATION SYSTEMS LLC | | SR3DTHLR5292 | 43334 | GENERAL MOTORS CORP DELCO MORAINE NDH DIV | | Z106K5VL430 | 70854 | SCHAEFFLER AEROSPACE USA CORP | | Z83 | 70854 | SCHAEFFLER AEROSPACE USA CORP |
|
Techincal Specification:
| BORE DIAMETER | 0.1873 INCHES MINIMUM AND 0.1875 INCHES MAXIMUM | | BORE SHAPE | STRAIGHT | | INNER RING WIDTH | 0.2110 INCHES MINIMUM AND 0.2120 INCHES MAXIMUM | | INTERNAL CLEARANCE | 0.0005 INCHES MINIMUM RADIAL AND 0.0008 INCHES MAXIMUM RADIAL | | LOAD DIRECTION | RADIAL | | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-L-6085 MIL SPEC SINGLE MATERIAL RESPONSE | | LUBRICATION MATERIAL | OIL | | OUTER RING WIDTH | 0.2120 INCHES NOMINAL | | OVERALL OUTSIDE DIAMETER | 0.6225 INCHES MINIMUM AND 0.6235 INCHES MAXIMUM | | MATERIAL | STEEL BALL | | MATERIAL | STEEL CORROSION RESISTING RETAINER | | MATERIAL | STEEL INNER RING | | MATERIAL | STEEL OUTER RING | | MATERIAL | STEEL SHIELD | | RETAINER FABRICATION METHOD | COILED | | SHIELD QUANTITY | 2 | | SPECIAL FEATURES | INNER RING RADIAL RUNOUT 0.0002 IN.; OUTER RING RADIAL RUNOUT 0.0004 IN.; STRATING TORQUE 0.3600 GM CM UNDER 400 GM THRUST LOAD; SLOTS EQUALLY SPACED CUT INTO FACE OF EXTENDED SIDE OF OUTER RING 0.6300 IN. W ON 0.5000 CUTTER R,CHORDAL LG NOT TO EXCEED 0.5720 IN.; OUTER RING OD THREADED 0.6250 IN. 40 NS; 0.0250 IN. TO 0.4000 IN. BY 45 DEG CHAMFER 0N OD CORNERS; 11BALLS 1 MM DIA 0.00001 SPHERICITY,0.00002 IN. MAX VARIATEION | | STYLE DESIGNATOR | NON-LOADING GROOVE, NON-SEPARABLE | | SURFACE FINISH | GROUND |
|
|