| BORE DIAMETER | 0.4721 INCHES MINIMUM AND 0.4724 INCHES MAXIMUM |
| BORE SHAPE | STRAIGHT |
| INTERNAL CLEARANCE | 0.0002 INCHES MINIMUM RADIAL AND 0.0006 INCHES MAXIMUM RADIAL |
| INTERNAL FIT-UP DESIGNATION | STANDARD |
| LOAD DIRECTION | RADIAL |
| LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE |
| LUBRICATION MATERIAL | GREASE |
| MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD SINGLE MATERIAL RESPONSE BALL |
| MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD SINGLE MATERIAL RESPONSE INNER RING |
| MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD SINGLE MATERIAL RESPONSE OUTER RING |
| MATERIAL | STEEL COMP E51100 BALL |
| MATERIAL | STEEL COMP E52100 INNER RING |
| MATERIAL | STEEL COMP E52100 OUTER RING |
| MATERIAL | STEEL RETAINER |
| MATERIAL | STEEL SHIELD |
| PROPRIETARY CHARACTERISTICS | PACS |
| OVERALL OUTSIDE DIAMETER | 1.2593 INCHES MINIMUM AND 1.2598 INCHES MAXIMUM |
| OVERALL WIDTH | 0.3887 INCHES MINIMUM AND 0.3937 INCHES MAXIMUM |
| RETAINER FABRICATION METHOD | PRESSED |
| SHIELD QUANTITY | 2 |
| SPECIAL FEATURES | INTERNAL CLARANCE MEASURED UNDER A 1 LB GAGE LOAD; SELECTED,CLASSIFIED AND TESTED BY THE ASSY MFR AT HIS PLANT |
| STYLE DESIGNATOR | NON-LOADING GROOVE, NON-SEPARABLE |
| SURFACE FINISH | GROUND |