|
|
|
National Stock Number:
3110-00-618-0868
Federal Supply Class:
3110
National Item Identification Number:
006180868
Description:
BEARING,BALL,ROD END
Detail:
A SPECIAL SINGLE OR MULTIPLE-ROW BALL BEARING, RIGID OR SELF-ALIGNING, AND CONSTRUCTED WITH EITHER A SOLID OR HOLLOW SHANK, INTERNALLY OR EXTERNALLY THREADED.
|
Manufacturer Information:
| 6816385 | 15860 | NEW HAMPSHIRE BALL BEARINGS INC | | 6816385 | 21335 | TIMKEN CO | | 6816385 | 24617 | GENERAL MOTORS CORP | | 6816385 | 63005 | ROLLS-ROYCE CORPORATION | | 6816385 | 73134 | ROLLER BEARING COMPANY OF AMERICA, INC. | | 6816385 | 73342 | ALLISON TRANSMISSION INC | | ABR3M-7G(P) | 15860 | NEW HAMPSHIRE BALL BEARINGS INC | | REP3M4-6E9642 | 21335 | TIMKEN CO | | REP3M4-6FS210MILG3278 | 21335 | TIMKEN CO | | ABR3M-7G(P) | 83086 | NEW HAMPSHIRE BALL BEARINGS INC |
|
Techincal Specification:
| ALIGNMENT TYPE | SELF-ALIGNING | | BEARING SEAL TYPE | CONTACT | | BORE DIAMETER | 0.1895 INCHES MINIMUM AND 0.1900 INCHES MAXIMUM | | INNER RING WIDTH | 0.4320 INCHES MINIMUM AND 0.4370 INCHES MAXIMUM | | LENGTH FROM BORE CENTER TO SHANK END | 1.5620 INCHES NOMINAL | | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE | | LUBRICATION MATERIAL | GREASE | | OVERALL LENGTH | 1.9530 INCHES NOMINAL | | OVERALL OUTSIDE DIAMETER | 0.7810 INCHES NOMINAL | | MATERIAL | RUBBER SYNTHETIC SEAL | | MATERIAL | STEEL BALL | | MATERIAL | STEEL INNER RING | | MATERIAL | STEEL OUTER RING | | MATERIAL | STEEL ROD END BODY | | NOMINAL THREAD SIZE | 0.250 INCHES | | OUTER RING WIDTH | 0.3280 INCHES NOMINAL | | SEAL QUANTITY | 2 | | SELF-ALIGNMENT ANGLE | 10.00 DEGREES NOMINAL | | SELF-ALIGNMENT LOCATION | INTERNAL | | SHANK DIAMETER | 0.2500 INCHES NOMINAL | | SHANK STYLE | EXTERNALLY THREADED | | SHANK THREAD LENGTH | 1.0000 INCHES NOMINAL | | STYLE DESIGNATOR | DOUBLE ROW, STAGGERED, BALL | | SPECIAL FEATURES | TESTED,SELECTED AND CLASSIFIED BY ASSY MFR AT HIS PLANT | | SURFACE TREATMENT | CADMIUM ALL EXTERNAL/EXPOSED METAL SURFACES | | THREAD DIRECTION | RIGHT-HAND | | THREAD CLASS | 3A | | THREAD SERIES DESIGNATOR | UNF | | THREAD QUANTITY PER INCH | 28 |
|
|