|
|
|
National Stock Number:
3110-00-627-1183
Federal Supply Class:
3110
National Item Identification Number:
006271183
Description:
BEARING,BALL,ANNULAR
Detail:
A cylindrical device in which the inner or outer ring turns upon a single or double row of hardened balls which roll easily between the two rings, thus minimizing friction. For items with faces specially ground for duplex mounting see BEARING, BALL, DUPLEX. Excludes BEARING, BALL, AIRFRAME.
|
Manufacturer Information:
| 1008-12V | 63504 | PALFINGER MARINE USA, LLC | | 1008-12V | 99300 | HARDING-WATERCRAFT INC | | SK289 | 63504 | PALFINGER MARINE USA, LLC | | SK289 | 99300 | HARDING-WATERCRAFT INC |
|
Techincal Specification:
| MATERIAL | STEEL BALL | | STEEL INNER RING | | STEEL OUTER RING | | STEEL OR | | COPPER ALLOY RETAINER | | WOOL SHIELD | | OVERALL WIDTH | 2.6200 INCHES MINIMUM AND | | 2.6250 INCHES MAXIMUM | | BORE DIAMETER | 2.0000 INCHES MINIMUM AND | | 2.0006 INCHES MAXIMUM | | OVERALL OUTSIDE DIAMETER | 4.2490 INCHES MINIMUM AND | | 4.2500 INCHES MAXIMUM | | OUTER RING WIDTH | 1.2500 INCHES NOMINAL | | INNER RING WIDTH | 2.6250 INCHES NOMINAL | | LUBRICATION MATERIAL | GREASE | | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | DOD-G-24508 MIL SPEC SINGLE MATERIAL RESPONSE | | BORE SHAPE | STRAIGHT | | SURFACE FINISH | GROUND | | SEAL QUANTITY | 2 | | BEARING SEAL TYPE | LABYRINTH | | ALIGNMENT TYPE | SELF-ALIGNING | | SELF-ALIGNMENT LOCATION | EXTERNAL | | LOAD DIRECTION | ANGULAR | | INTERNAL FIT-UP DESIGNATION | STANDARD | | SPECIAL FEATURES | BRASS ALIGNING RING SYNTHETIC RUBBER RING TYPE SEAL AND GROOVE IN BORE ON SET SCREW SIDE; OD OF INNER RING SHOULDERED TO A DIAMETER OF 2.6250 IN. ON SIDE OPPOSITE SET SCREW; LUBRICANT HOLE IN OD OF ALIGNING RING AND OD OF OUTER RING; SET SCREW IN INNER RING; FURNISHED WITH 1/4 IN.-0.480 IN. LONG LOCKPIN,ADAPTER AND 1/8. PIPE THD PLUG; SELECTED,CLASSIFIED AND TESTED BY THE ASSY MFR AT HIS PLANT | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 63504 | | DESIGN CONTROL REFERENCE | 1008-12V |
|
|