|
|
|
National Stock Number:
3110-00-630-5756
Federal Supply Class:
3110
National Item Identification Number:
006305756
Description:
BEARING,BALL,ROD END
Detail:
A SPECIAL SINGLE OR MULTIPLE-ROW BALL BEARING, RIGID OR SELF-ALIGNING, AND CONSTRUCTED WITH EITHER A SOLID OR HOLLOW SHANK, INTERNALLY OR EXTERNALLY THREADED.
|
Manufacturer Information:
| 2810734 | 001JK | EMBRAER S.A. DBA EMBRAER | | 2810734 | S4956 | EMBRAER EMPRESA BRASILEIRA DE AERONAUTICA SA | | NAS659-4-7 | 80205 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE |
|
Techincal Specification:
| ALIGNMENT TYPE | RIGID | | BEARING SEAL TYPE | CONTACT | | BORE DIAMETER | 0.2495 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM | | INNER RING WIDTH | 0.6820 INCHES MINIMUM AND 0.6870 INCHES MAXIMUM | | LENGTH FROM BORE CENTER TO SHANK END | 2.2400 INCHES MINIMUM AND 2.2600 INCHES MAXIMUM | | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE | | LUBRICATION MATERIAL | GREASE | | OVERALL LENGTH | 2.7140 INCHES MINIMUM AND 2.7340 INCHES MAXIMUM | | OVERALL OUTSIDE DIAMETER | 0.9480 INCHES MAXIMUM | | MATERIAL | RUBBER SYNTHETIC SEAL | | MATERIAL | STEEL BALL | | MATERIAL | STEEL INNER RING | | MATERIAL | STEEL OUTER RING | | MATERIAL | STEEL SHAFT | | NOMINAL THREAD SIZE | 0.437 INCHES | | OUTER RING WIDTH | 0.5410 INCHES MAXIMUM | | SEAL QUANTITY | 2 | | SELF-ALIGNMENT ANGLE | 10.00 DEGREES NOMINAL | | SHANK DIAMETER | 0.4294 INCHES MINIMUM AND 0.4375 INCHES MAXIMUM | | SHANK STYLE | EXTERNALLY THREADED | | SHANK THREAD LENGTH | 1.6150 INCHES MINIMUM AND 1.6350 INCHES MAXIMUM | | STYLE DESIGNATOR | DOUBLE ROW, STAGGERED, BALL | | SPECIAL FEATURES | SLOTTED SHANK | | SURFACE TREATMENT | CADMIUM ALL EXTERNAL/EXPOSED METAL SURFACES | | TEST DATA DOCUMENT | 81349-MIL-I-6868 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). | | THREAD DIRECTION | RIGHT-HAND | | THREAD CLASS | 3A | | THREAD SERIES DESIGNATOR | UNJF | | THREAD QUANTITY PER INCH | 20 |
|
|