| MATERIAL | STEEL BALL |
| STEEL INNER RING |
| STEEL OUTER RING |
| RUBBER SEAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | FED-STD-66,AISI/SAE E52100 FED STD SINGLE MATERIAL RESPONSE BALL |
| FED-STD-66,AISI/SAE E52100 FED STD SINGLE MATERIAL RESPONSE INNER RING |
| FED-STD-66,AISI/SAE E52100 FED STD SINGLE MATERIAL RESPONSE OUTER RING |
| 204-011-310-1,97499 MFR REF SINGLE MATERIAL RESPONSE SEAL |
| OVERALL WIDTH | 0.7300 INCHES MINIMUM AND |
| 0.7500 INCHES MAXIMUM |
| BORE DIAMETER | 0.6245 INCHES MINIMUM AND |
| 0.6250 INCHES MAXIMUM |
| OVERALL OUTSIDE DIAMETER | 1.3745 INCHES MINIMUM AND |
| 1.3750 INCHES MAXIMUM |
| LUBRICATION MATERIAL | GREASE |
| LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-G-25537 MIL SPEC SINGLE MATERIAL RESPONSE |
| SURFACE FINISH | GROUND |
| SEAL QUANTITY | 2 |
| BEARING SEAL TYPE | CONTACT |
| LOAD DIRECTION | RADIAL |
| INTERNAL CLEARANCE | 0.0050 INCHES NOMINAL AXIAL AND |
| 0.0010 INCHES NOMINAL RADIAL |
| BEARING PRELOAD RATING | 100.0 POUNDS NOMINAL |
| SPECIAL FEATURES | 2 LUBRICATION HOLES EQUALLY SPACED ON OUTER RING 0.125 IN. DIA |