|
|
|
National Stock Number:
3110-00-726-4896
Federal Supply Class:
3110
National Item Identification Number:
007264896
Description:
BEARING,BALL,ANNULAR
Detail:
A cylindrical device in which the inner or outer ring turns upon a single or double row of hardened balls which roll easily between the two rings, thus minimizing friction. For items with faces specially ground for duplex mounting see BEARING, BALL, DUPLEX. Excludes BEARING, BALL, AIRFRAME.
|
Manufacturer Information:
| 204-040-142-001 | 97499 | BELL TEXTRON INC | | 204-040-142-1 | 97499 | BELL TEXTRON INC | | M9319K3MBRE8718 | 21335 | TIMKEN CO | | SPECIAL1919S1 | 38443 | SKF USA INC. | | D2-36691 | 38443 | SKF USA INC. |
|
Techincal Specification:
| BORE DIAMETER | 3.7397 INCHES MINIMUM AND 3.7402 INCHES MAXIMUM | | BORE SHAPE | STRAIGHT | | INTERNAL CLEARANCE | 0.0001 INCHES MINIMUM RADIAL AND 0.0009 INCHES MAXIMUM RADIAL | | LOAD DIRECTION | RADIAL | | OVERALL OUTSIDE DIAMETER | 5.1175 INCHES MINIMUM AND 5.1181 INCHES MAXIMUM | | OVERALL WIDTH | 0.4674 INCHES MINIMUM AND 0.4724 INCHES MAXIMUM | | RETAINER FABRICATION METHOD | MACHINED | | STANDARD TOLERANCE DESIGNATION | ABEC NO.3 | | STYLE DESIGNATOR | NON-LOADING GROOVE, NON-SEPARABLE | | SPECIAL FEATURES | STABILIZE FOR OPERATION FROM M 65 DEG TO P 300 DEG F | | SURFACE FINISH | GROUND | | TEST DATA DOCUMENT | 38443-QC+2 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). AND 21335-PS33 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
|
|