| DISTANCE FROM HORIZONTAL CENTERLINE TO CENTER OF RIGHT HOLE | 0.938 INCHES NOMINAL |
| DISTANCE FROM VERTICAL CENTERLINE TO CENTER OF RIGHT HOLE | 0.938 INCHES NOMINAL |
| APERTURE DIAMETER | 1.2598 INCHES MINIMUM AND 1.2605 INCHES MAXIMUM |
| BODY DIAMETER | 1.7485 INCHES MINIMUM AND 1.7495 INCHES MAXIMUM |
| BODY THICKNESS | 0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM |
| COUNTERBORE DIAMETER | 1.430 INCHES MINIMUM AND 1.431 INCHES MAXIMUM |
| COUNTERBORE DEPTH | 0.615 INCHES NOMINAL |
| CROSS-SECTIONAL SHAPE STYLE | COUNTERBORED W/ APERTURE |
| DISTANCE BETWEEN HOLES ALONG LENGTH | 1.876 INCHES NOMINAL |
| DISTANCE BETWEEN HOLES ALONG WIDTH | 1.876 INCHES NOMINAL |
| HARDNESS RATING | 32.0 ROCKWELL C MINIMUM AND 39.0 ROCKWELL C MAXIMUM |
| LENGTH | 2.483 INCHES NOMINAL |
| OVERALL THICKNESS | 2.320 INCHES MINIMUM AND 2.360 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6322 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | STEEL OVERALL |
| MINOR THICKNESS | 0.800 INCHES MINIMUM AND 0.810 INCHES MAXIMUM |
| MOUNTING HOLE DIAMETER | 0.276 INCHES MINIMUM AND 0.286 INCHES MAXIMUM |
| MOUNTING HOLE ARRANGEMENT STYLE | FOUR HOLES |
| MOUNTING HOLE TYPE | ROUND, UNTHREADED |
| SPECIAL FEATURES | REDUCED OD OF BODY TO 1.420 IN. DIA MIN TO 1.440 IN. DIA MAX,0.870 IN. MIN TO 0.890 IN. MAX FROM INSIDE FLANGE FACE,0.172 IN. MIN R TO 0.203 IN. MAX R CORNER; CIRCUMFERENTIAL GROOVE OD OF BODY,1.590 IN. DIA MIN TO 1.610 IN. DIA MAS,0.490 IN. W,0.240 IN. NOM FROM INSIDE FLANGE FACE; THREE EQUALLY SPACED 0.625 IN. DIA NOM THRU HOLE IN REDUCED DIA SECTION OF BODY,CENTERED 1.410 IN. NOM FROM INSIDE FLANGE FACE; INTERNA FLANGE 1.100 IN. DIA NOM,0.045 IN. NOM W,LOCATED 1.170 IN. NOM FROM INSIDE FLANGE FACE |
| STYLE DESIGNATOR | SQUARE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | AMS 2400 ASSN STD SINGLE TREATMENT RESPONSE OUTER FACE AS MOUNTED |
| SURFACE TREATMENT | CADMIUM OUTER FACE AS MOUNTED |