| ALIGNMENT TYPE | SELF-ALIGNING |
| BEARING SEAL TYPE | CONTACT |
| BORE DIAMETER | 0.1895 INCHES MINIMUM AND 0.1900 INCHES MAXIMUM |
| INNER RING WIDTH | 0.4950 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM |
| LENGTH FROM BORE CENTER TO SHANK END | 1.6450 INCHES MINIMUM AND 1.6750 INCHES MAXIMUM |
| LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE |
| LUBRICATION MATERIAL | GREASE |
| OUTER RING WIDTH | 0.3600 INCHES MAXIMUM |
| OVERALL LENGTH | 2.2000 INCHES NOMINAL |
| OVERALL OUTSIDE DIAMETER | 1.0800 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-7420 MIL SPEC SINGLE MATERIAL RESPONSE INNER RING |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-7420 MIL SPEC SINGLE MATERIAL RESPONSE ROD END BODY |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-7420 MIL SPEC SINGLE MATERIAL RESPONSE ROLLER |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE SHIELD |
| MATERIAL | RUBBER SYNTHETIC SEAL |
| MATERIAL | STEEL COMP E52100 INNER RING |
| MATERIAL | STEEL COMP E52100 ROD END BODY |
| MATERIAL | STEEL COMP E52100 ROLLER |
| MATERIAL | STEEL COMP 430 SHIELD |
| NOMINAL THREAD SIZE | 0.312 INCHES |
| RETAINER FABRICATION METHOD | MACHINED |
| SEAL QUANTITY | 2 |
| SELF-ALIGNMENT ANGLE | 10.000 DEGREES NOMINAL |
| SELF-ALIGNMENT LOCATION | EXTERNAL |
| SHANK DIAMETER | 0.4940 INCHES NOMINAL |
| SHANK STYLE | INTERNALLY THREADED |
| SHANK THREAD LENGTH | 0.8100 INCHES MINIMUM |
| SHIELD QUANTITY | 2 |
| STYLE DESIGNATOR | SINGLE ROW, CONCAVE ROLLERS |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD CLASS | 3B |
| THREAD QUANTITY PER INCH | 24 |
| THREAD SERIES DESIGNATOR | UNJF |