| MATERIAL | STEEL COMP E52100 ALIGNMENT RING |
| STEEL COMP E52100 BALL |
| STEEL COMP E52100 INNER RING |
| STEEL COMP E52100 OUTER RING |
| STEEL COMP 4130 ROD END BODY |
| RUBBER SYNTHETIC SEAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | FED-STD-66 FED STD SINGLE MATERIAL RESPONSE ALIGNMENT RING |
| FED-STD-66 FED STD SINGLE MATERIAL RESPONSE BALL |
| FED-STD-66 FED STD SINGLE MATERIAL RESPONSE INNER RING |
| FED-STD-66 FED STD SINGLE MATERIAL RESPONSE OUTER RING |
| MIL-S-6758 MIL SPEC SINGLE MATERIAL RESPONSE ROD END BODY |
| 134AMM10038-1,26512 MFR REF SINGLE MATERIAL RESPONSE SEAL |
| STYLE DESIGNATOR | DOUBLE ROW, STAGGERED, BALL |
| SHANK STYLE | EXTERNALLY THREADED |
| ALIGNMENT TYPE | SELF-ALIGNING |
| SURFACE TREATMENT | CADMIUM ALIGNMENT RING |
| CADMIUM BALL |
| CADMIUM INNER RING |
| CADMIUM OUTER RING |
| CADMIUM ROD END BODY |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 1,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE ALIGNMENT RING |
| QQ-P-416,TYPE 1,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE BALL |
| QQ-P-416,TYPE 1,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE INNER RING |
| QQ-P-416,TYPE 1,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OUTER RING |
| QQ-P-416,TYPE 2 FED SPEC SINGLE TREATMENT RESPONSE ROD END BODY |
| SELF-ALIGNMENT ANGLE | 0.10 DEGREES NOMINAL |
| OVERALL LENGTH | 2.2920 INCHES MINIMUM AND |
| 2.3320 INCHES MAXIMUM |
| BORE DIAMETER | 0.1895 INCHES MINIMUM AND |
| 0.1900 INCHES MAXIMUM |
| OVERALL OUTSIDE DIAMETER | 0.8540 INCHES MINIMUM AND |
| 0.8940 INCHES MAXIMUM |
| OUTER RING WIDTH | 0.1980 INCHES MINIMUM AND |
| 0.2030 INCHES MAXIMUM |
| INNER RING WIDTH | 0.2400 INCHES MINIMUM AND |
| 0.2450 INCHES MAXIMUM |
| LENGTH FROM BORE CENTER TO SHANK END | 1.8650 INCHES MINIMUM AND |
| 1.8850 INCHES MAXIMUM |
| SHANK DIAMETER | 0.2435 INCHES MINIMUM AND |
| 0.2500 INCHES MAXIMUM |
| SHANK THREAD LENGTH | 1.0520 INCHES MINIMUM AND |
| 1.0720 INCHES MAXIMUM |
| THREAD SERIES DESIGNATOR | UNF |
| NOMINAL THREAD SIZE | 0.250 INCHES |
| THREAD QUANTITY PER INCH | 28 |
| THREAD CLASS | 3A |
| THREAD DIRECTION | RIGHT-HAND |
| LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE |
| SEAL QUANTITY | 2 |
| BEARING SEAL TYPE | CONTACT |
| SELF-ALIGNMENT LOCATION | INTERNAL |
| FEATURES PROVIDED | ALIGNING RING |
| LUBRICATION MATERIAL | GREASE |
| TEST DATA DOCUMENT | 26512-134AMM10038-1 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| THE MANUFACTURERS DATA | |
| MANUFACTURERS CODE | 26512 |
| DESIGN CONTROL REFERENCE | 134AMM10038-1 |