| MATERIAL | STEEL COMP E52100 ALIGNMENT RING |
| STEEL COMP E52100 INNER RING |
| STEEL COMP E52100 OUTER RING |
| STEEL COMP 4340 ROD END BODY |
| STEEL COMP E52100 ROLLER |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS6440,81346 MFR REF SINGLE MATERIAL RESPONSE ALIGNMENT RING |
| AMS6440,81346 MFR REF SINGLE MATERIAL RESPONSE INNER RING |
| AMS6440,81346 MFR REF SINGLE MATERIAL RESPONSE OUTER RING |
| MIL-S-5000 MIL SPEC SINGLE MATERIAL RESPONSE ROD END BODY |
| AMS6440,81346 MFR REF SINGLE MATERIAL RESPONSE ROLLER |
| SURFACE TREATMENT | CADMIUM ALIGNMENT RING |
| CADMIUM INNER RING |
| CADMIUM OUTER RING |
| CADMIUM ROD END BODY |
| CADMIUM ROLLER |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 1,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE ALIGNMENT RING |
| QQ-P-416,TYPE 1,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE INNER RING |
| QQ-P-416,TYPE 1,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OUTER RING |
| GSS8050A,26512 MFR REF SINGLE TREATMENT RESPONSE ROD END BODY |
| QQ-P-416,TYPE 1,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE ROLLER |
| STYLE DESIGNATOR | NEEDLE ROLLER |
| OVERALL LENGTH | 5.5830 INCHES MINIMUM AND |
| 5.6340 INCHES MAXIMUM |
| BORE DIAMETER | 0.5618 INCHES MINIMUM AND |
| 0.5625 INCHES MAXIMUM |
| OVERALL OUTSIDE DIAMETER | 2.1660 INCHES MINIMUM AND |
| 2.2060 INCHES MAXIMUM |
| OUTER RING WIDTH | 0.7810 INCHES MINIMUM AND |
| 0.7910 INCHES MAXIMUM |
| INNER RING WIDTH | 0.8700 INCHES MINIMUM AND |
| 0.8750 INCHES MAXIMUM |
| LENGTH FROM BORE CENTER TO SHANK END | 4.5000 INCHES MINIMUM AND |
| 4.5310 INCHES MAXIMUM |
| SHANK STYLE | EXTERNALLY THREADED W/SLOT |
| SHANK DIAMETER | 1.1136 INCHES MINIMUM AND |
| 1.1250 INCHES MAXIMUM |
| SHANK THREAD LENGTH | 3.0520 INCHES MINIMUM AND |
| 3.0720 INCHES MAXIMUM |
| THREAD SERIES DESIGNATOR | UNF |
| NOMINAL THREAD SIZE | 1.125 INCHES |
| THREAD QUANTITY PER INCH | 12 |
| THREAD CLASS | 3A |
| THREAD DIRECTION | RIGHT-HAND |
| LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE |
| ALIGNMENT TYPE | SELF-ALIGNING |
| SELF-ALIGNMENT LOCATION | INTERNAL |
| FEATURES PROVIDED | ALIGNING RING |
| TEST DATA DOCUMENT | 81349-MIL-I-6868 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| SPECIAL FEATURES | FITTING,LUBRICATION THRU ONE WALL |
| LUBRICATION MATERIAL | GREASE |
| THE MANUFACTURERS DATA | |
| MANUFACTURERS CODE | 26512 |
| DESIGN CONTROL REFERENCE | 134HM10028-1 |