| DISTANCE FROM VERTICAL CENTERLINE TO CENTER OF RIGHT HOLE | 0.649 INCHES NOMINAL |
| COUNTERBORE DIAMETER | 0.960 INCHES NOMINAL |
| COUNTERBORE DEPTH | 0.133 INCHES NOMINAL |
| CROSS-SECTIONAL SHAPE STYLE | RAISED SURFACE W/O APERTURE |
| DISTANCE BETWEEN HOLES ALONG LENGTH | 1.298 INCHES NOMINAL |
| DISTANCE BETWEEN HOLES ALONG WIDTH | 0.750 INCHES NOMINAL |
| DISTANCE FROM HORIZONTAL CENTERLINE TO CENTER OF RIGHT HOLE | 0.375 INCHES NOMINAL |
| OUTSIDE DIAMETER | 1.970 INCHES NOMINAL |
| OUTSIDE RAISED SURFACE DIAMETER | 1.102 INCHES NOMINAL |
| OVERALL THICKNESS | 0.195 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-225/6 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | ALUMINUM ALLOY OVERALL |
| MINOR THICKNESS | 0.062 INCHES NOMINAL |
| MOUNTING HOLE DIAMETER | 0.206 INCHES NOMINAL |
| MOUNTING HOLE ARRANGEMENT STYLE | FOUR HOLES |
| MOUNTING HOLE TYPE | ROUND, UNTHREADED |
| RAISED SURFACE HEIGHT | 0.133 INCHES NOMINAL |
| SPECIAL FEATURES | HEAT TREAT PER MIL-H-6088 TO TEMPT4 |
| STYLE DESIGNATOR | TWO FLATS |
| WIDTH ACROSS FLATS | 1.280 INCHES NOMINAL |
| SURFACE FINISH | 125.0 MICROINCHES OVERALL |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625 TYPE 2,CLASS 1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| SURFACE TREATMENT | ANODIZE OVERALL |