|
|
|
National Stock Number:
3110-00-863-1195
Federal Supply Class:
3110
National Item Identification Number:
008631195
Description:
BEARING,BALL,ANNULAR
Detail:
A cylindrical device in which the inner or outer ring turns upon a single or double row of hardened balls which roll easily between the two rings, thus minimizing friction. For items with faces specially ground for duplex mounting see BEARING, BALL, DUPLEX. Excludes BEARING, BALL, AIRFRAME.
|
Manufacturer Information:
| 1905S305 | 38443 | SKF USA INC. | | 2-300-031 | 99193 | HONEYWELL INTERNATIONAL INC. | | 2-300-031-01 | 38443 | SKF USA INC. | | 2-300-031-02 | 78118 | MPB CORPORATION | | 2-300-031-01 | 99193 | HONEYWELL INTERNATIONAL INC. | | 2-300-031-01L | 99193 | HONEYWELL INTERNATIONAL INC. | | RM9305KMBRE8682 | 21335 | TIMKEN CO | | D3-50141 | 38443 | SKF USA INC. | | HKB005-158 | 78118 | MPB CORPORATION | | 2-300-031-02 | 99193 | HONEYWELL INTERNATIONAL INC. | | 2-300-031-03 | 99193 | HONEYWELL INTERNATIONAL INC. |
|
Techincal Specification:
| BORE DIAMETER | 0.9843 INCHES NOMINAL | | BORE SHAPE | STRAIGHT | | FEATURES PROVIDED | ALIGNING RING | | INTERNAL CLEARANCE | 0.0040 INCHES MINIMUM AXIAL AND 0.0060 INCHES MAXIMUM AXIAL AND 0.0003 INCHES MINIMUM RADIAL AND 0.0009 INCHES MAXIMUM RADIAL | | LOAD DIRECTION | RADIAL | | MATERIAL DOCUMENT AND CLASSIFICATION | -3905,91547 MFR REF SINGLE MATERIAL RESPONSE RETAINER | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6441 81343 ASSN STD SINGLE MATERIAL RESPONSE INNER RING | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6441 81343 ASSN STD SINGLE MATERIAL RESPONSE OUTER RING | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6440/7440 81343 ASSN STD SINGLE MATERIAL RESPONSE BALL | | MATERIAL | COPPER RETAINER | | MATERIAL | STEEL BALL | | MATERIAL | STEEL INNER RING | | MATERIAL | STEEL OUTER RING | | OVERALL OUTSIDE DIAMETER | 1.6535 INCHES NOMINAL | | OVERALL WIDTH | 0.3543 INCHES NOMINAL | | RETAINER FABRICATION METHOD | MACHINED | | SPECIAL FEATURES | FACES OF INNER RING SQ W/BORE WITHIN 0.0004 IN.,FACES OF OUTER RING SQW/OD WITHIN 0.0004 IN.,PARALLELISM OFOUTER AND INNER RING SIDES 0.0004 IN.,OD CONCENTRIC W/BORE WITHIN 0.002 TO 0.005 IN.,HEAT STABILIZED FOR OPERATION AT M65 DEG F TO P350 DEG F,BORE SURFACE 16 TO 20 UIN AA,OD SURFACE 15 TO 16 UIN AA,INNER AND OUTER RING RACEWAY SURFACES 6 TO 8 UIN AA,RETAINER POCKET SURFACE 30 TO 63 UIN AA,LIPS OF INNER RING SURFACE 10 TO 20 UIN AA,RING AND BALL ROCKWELL HARDEN C58.0 TO C62.0 | | STANDARD TOLERANCE DESIGNATION | ABEC NO.3 | | STYLE DESIGNATOR | NON-LOADING GROOVE, NON-SEPARABLE | | SURFACE FINISH | GROUND | | TEST DATA DOCUMENT | E1004-91547 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). AND +6903-91547 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
|
|