|
|
|
National Stock Number:
3110-00-928-2343
Federal Supply Class:
3110
National Item Identification Number:
009282343
Description:
BEARING,BALL,DUPLEX
Detail:
Two single row annular ball bearings selected dimensionally to be a matched pair or set. The ring faces have been specially ground to specified offsets that will produce predetermined preload when mounted. May include a single row angular contact bearing with faces specially ground for duplex mounting.
|
Manufacturer Information:
| 950543-7 | 06481 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | EX06614B | 43334 | GENERAL MOTORS CORP DELCO MORAINE NDH DIV | | S418CHDB1B-704 | 40920 | MPB CORP | | SR144SX3T-4DB1C44 | 70854 | SCHAEFFLER AEROSPACE USA CORP | | SR144UP1 | 83086 | NEW HAMPSHIRE BALL BEARINGS INC |
|
Techincal Specification:
| MATERIAL | STEEL CORROSION RESISTING OVERALL | | STYLE DESIGNATOR | COUNTERBORED OUTER RINGS, NON-SEPARABLE, BACK TO BACK MOUNTING | | OVERALL WIDTH | 0.1774 INCHES MINIMUM AND | | 0.1874 INCHES MAXIMUM | | BORE DIAMETER | 0.1250 INCHES NOMINAL | | OVERALL OUTSIDE DIAMETER | 0.2500 INCHES NOMINAL | | LUBRICATION MATERIAL | LUBRICATING OIL | | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-L-6085 MIL SPEC SINGLE MATERIAL RESPONSE | | STANDARD TOLERANCE DESIGNATION | ABEC NO.7 | | CALIBRATION DESIGNATOR | C | | SURFACE FINISH | GROUND | | RETAINER FABRICATION METHOD | PRESSED | | SHIELD QUANTITY | 2 | | LOAD DIRECTION | ANGULAR | | BEARING PRELOAD RATING | 0.5 POUNDS MINIMUM AND | | 1.5 POUNDS MAXIMUM | | CONTACT ANGLE | 14.0 DEGREES MINIMUM AND | | 19.0 DEGREES MAXIMUM | | SPECIAL FEATURES | PAIR OF BEARINGS,DUPLEX MOUNTED UNSHIELDED SIDES. MAX TORQUE 20.000 MG/MM UNDER 75 GM THRUST LOAD W/LUBRICATING OIL APPLIED. V MARK ON OF BEARING ASSY |
|
|