|
|
|
National Stock Number:
3110-00-936-4353
Federal Supply Class:
3110
National Item Identification Number:
009364353
Description:
BEARING,ROLLER,CYLINDRICAL
Detail:
A nonadjustable roller bearing consisting of a single or multiple-row of hardened cylindrical rollers and a retainer used with or without inner or oute r rings. Excludes BEARING, ROLLER, AIRFRAME.
|
Manufacturer Information:
| 456708 | 52676 | SKF USA INC. | | MR105KD400 | 38443 | SKF USA INC. | | SB2110-2 | 38443 | SKF USA INC. | | SB2110-2 | 78286 | SIKORSKY AIRCRAFT CORPORATION |
|
Techincal Specification:
| BORE DIAMETER | 25.0 MILLIMETERS NOMINAL | | BORE SHAPE | STRAIGHT | | INTERNAL CLEARANCE | 0.0011 INCHES MINIMUM RADIAL AND 0.0021 INCHES MAXIMUM RADIAL | | LOCATING FEATURE | ONE DIRECTION | | OVERALL OUTSIDE DIAMETER | 47.0 MILLIMETERS NOMINAL | | OVERALL WIDTH | 12.0 MILLIMETERS NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | SB2110-2,78286 MFR REF SINGLE MATERIAL RESPONSE INNER RING | | MATERIAL DOCUMENT AND CLASSIFICATION | SB2110-2,78286 MFR REF SINGLE MATERIAL RESPONSE OUTER RING | | MATERIAL DOCUMENT AND CLASSIFICATION | SB2110-2,78286 MFR REF SINGLE MATERIAL RESPONSE RETAINER | | MATERIAL DOCUMENT AND CLASSIFICATION | SB2110-2,78286 MFR REF SINGLE MATERIAL RESPONSE ROLLER | | MATERIAL | COPPER ALLOY RETAINER | | MATERIAL | STEEL INNER RING | | MATERIAL | STEEL OUTER RING | | MATERIAL | STEEL ROLLER | | RETAINER FABRICATION METHOD | MACHINED | | STANDARD TOLERANCE DESIGNATION | RBEC NO.5 | | SPECIAL FEATURES | STABILIZED FOR OPERATION FROM M65 DEG F TO P250 DEG F | | STYLE DESIGNATOR | SINGLE ROW, ONE-DIRECTION LOCATING, TWO LIP INNER RING, ONE LIP OUTER RING, SEPARABLE | | SURFACE FINISH | GROUND | | TEST DATA DOCUMENT | 81349-MIL-I-6868 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
|
|