|
|
|
National Stock Number:
3110-00-937-1182
Federal Supply Class:
3110
National Item Identification Number:
009371182
Description:
BEARING,BALL,ANNULAR
Detail:
A cylindrical device in which the inner or outer ring turns upon a single or double row of hardened balls which roll easily between the two rings, thus minimizing friction. For items with faces specially ground for duplex mounting see BEARING, BALL, DUPLEX. Excludes BEARING, BALL, AIRFRAME.
|
Manufacturer Information:
| 1-300-329 | 99193 | HONEYWELL INTERNATIONAL INC. | | 1-300-329-01 | 78U39 | OZARK AEROWORKS LLC | | 460920 | 38443 | SKF USA INC. | | 1-300-329-02 | 78U39 | OZARK AEROWORKS LLC | | 1-300-329-02 | 99193 | HONEYWELL INTERNATIONAL INC. | | 1-300-329-01 | 99193 | HONEYWELL INTERNATIONAL INC. | | MM211VM6MBRE9266 | 21335 | TIMKEN CO | | 460920 | 52676 | SKF USA INC. |
|
Techincal Specification:
| BORE DIAMETER | 55.00 MILLIMETERS NOMINAL | | BORE SHAPE | STRAIGHT | | CONTACT ANGLE | 22.0 DEGREES MAXIMUM | | FEATURES PROVIDED | ALIGNING RING | | INTERNAL CLEARANCE | 0.0130 INCHES NOMINAL AXIAL AND 0.0024 INCHES NOMINAL RADIAL | | LOAD DIRECTION | ANGULAR | | MATERIAL DOCUMENT AND CLASSIFICATION | -3900,91547 MFR REF SINGLE MATERIAL RESPONSE RETAINER | | MATERIAL DOCUMENT AND CLASSIFICATION | -4001,91547 MFR REF SINGLE MATERIAL RESPONSE OUTER RING | | MATERIAL DOCUMENT AND CLASSIFICATION | -4001,91547 MFR REF SINGLE MATERIAL RESPONSE BALL | | MATERIAL DOCUMENT AND CLASSIFICATION | -4001,91547 MFR REF SINGLE MATERIAL RESPONSE INNER RING | | OVERALL OUTSIDE DIAMETER | 100.00 MILLIMETERS NOMINAL | | OVERALL WIDTH | 21.00 MILLIMETERS NOMINAL | | MATERIAL | COPPER ALLOY RETAINER | | MATERIAL | STEEL BALL | | MATERIAL | STEEL INNER RING | | MATERIAL | STEEL OUTER RING | | PRECIOUS MATERIAL AND LOCATION | RETAINER SILVER | | PRECIOUS MATERIAL | SILVER | | RETAINER FABRICATION METHOD | MACHINED | | SPECIAL FEATURES | HEAT STABILIZED FOR OPERATION AT M65 TO P350 DEG F BALL,INNER AND OUTERRINGS ROCKWELL HARDENED 58.0 TO 62.0 CSCALE INNER AND OUTER RING RACE WAYS 8 UIN AA,BORE AND OD SURFACE INNER RING LIPS 16 UIN AA,RETAINER 32 UIN AAO/A | | STANDARD TOLERANCE DESIGNATION | ABEC NO.5 | | STYLE DESIGNATOR | 4 POINT BALL CONTACT, SPLIT INNER RING, SEPARABLE | | SURFACE FINISH | GROUND | | TEST DATA DOCUMENT | 91547-E1004 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). OR 91547-+6903 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
|
|