| BORE DIAMETER | 0.2500 INCHES MINIMUM AND 0.2502 INCHES MAXIMUM |
| BORE SHAPE | STRAIGHT |
| CALIBRATION DESIGNATOR | C |
| FLANGE OUTSIDE DIAMETER | 0.6850 INCHES MINIMUM AND 0.6920 INCHES MAXIMUM |
| FLANGE WIDTH | 0.0400 INCHES MINIMUM AND 0.0440 INCHES MAXIMUM |
| INNER RING WIDTH | 0.2490 INCHES MINIMUM AND 0.2510 INCHES MAXIMUM |
| INTERNAL CLEARANCE | 0.0002 INCHES MINIMUM RADIAL AND 0.0005 INCHES MAXIMUM RADIAL |
| INTERNAL FIT-UP DESIGNATION | STANDARD |
| LOAD DIRECTION | RADIAL |
| LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE |
| LUBRICATION MATERIAL | GREASE |
| OUTER RING TAPER | 0.0680 PER FOOT IN INCHES NOMINAL |
| OUTER RING WIDTH | 0.2220 INCHES MINIMUM AND 0.2260 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD SINGLE MATERIAL RESPONSE BALL |
| MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD SINGLE MATERIAL RESPONSE INNER RING |
| MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD SINGLE MATERIAL RESPONSE OUTER RING |
| MATERIAL | STEEL COMP 440C BALL |
| MATERIAL | STEEL COMP 440C OUTER RING |
| MATERIAL | STEEL COMP 440C INNER RING |
| MATERIAL | STEEL CORROSION RESISTING RETAINER |
| MATERIAL | STEEL CORROSION RESISTING SHIELD |
| RETAINER FABRICATION METHOD | PRESSED |
| SHIELD QUANTITY | 2 |
| STANDARD TOLERANCE DESIGNATION | ABEC NO.5 |
| STYLE DESIGNATOR | NON-LOADING GROOVE, NON-SEPARABLE |
| SURFACE FINISH | GROUND |