|
|
|
National Stock Number:
3110-01-008-1173
Federal Supply Class:
3110
National Item Identification Number:
010081173
Description:
BEARING,BALL,ANNULAR
Detail:
A cylindrical device in which the inner or outer ring turns upon a single or double row of hardened balls which roll easily between the two rings, thus minimizing friction. For items with faces specially ground for duplex mounting see BEARING, BALL, DUPLEX. Excludes BEARING, BALL, AIRFRAME.
|
Manufacturer Information:
| 7903309-3 | 14927 | S/N PRECISION ENTERPRISES, INC. | | 7903309-3 | 40920 | MPB CORP | | S8516RHHEP25 | 40920 | MPB CORP | | SR1810PPEEK25 | 83086 | NEW HAMPSHIRE BALL BEARINGS INC | | 7903309-3 | 83086 | NEW HAMPSHIRE BALL BEARINGS INC | | 7903309-3 | 93322 | GE AVIATION SYSTEMS LLC DBA GE AVIATION |
|
Techincal Specification:
| BORE DIAMETER | 0.3125 INCHES NOMINAL | | BORE SHAPE | STRAIGHT | | INNER RING WIDTH | 0.1875 INCHES NOMINAL | | INTERNAL CLEARANCE | 0.0002 INCHES MINIMUM RADIAL AND 0.0005 INCHES MAXIMUM RADIAL | | LOAD DIRECTION | RADIAL | | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | G300,FSCM 24446 MFR REF SINGLE MATERIAL RESPONSE | | LUBRICATION MATERIAL | GREASE | | OVERALL OUTSIDE DIAMETER | 0.5000 INCHES NOMINAL | | OUTER RING WIDTH | 0.1562 INCHES NOMINAL | | RETAINER FABRICATION METHOD | STAMPED | | SHIELD QUANTITY | 2 | | STANDARD TOLERANCE DESIGNATION | ABEC NO.3 | | STYLE DESIGNATOR | NON-LOADING GROOVE, NON-SEPARABLE | | SPECIAL FEATURES | SPECIFIED LUBRICANT WITH OIL F50 | | SURFACE FINISH | GROUND | | TEST DATA DOCUMENT | 81349-MIL-E-5400 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). AND 81349-MIL-STD810 STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
|
|