|
|
|
National Stock Number:
3110-01-028-2503
Federal Supply Class:
3110
National Item Identification Number:
010282503
Description:
BEARING,BALL,ANNULAR
Detail:
A cylindrical device in which the inner or outer ring turns upon a single or double row of hardened balls which roll easily between the two rings, thus minimizing friction. For items with faces specially ground for duplex mounting see BEARING, BALL, DUPLEX. Excludes BEARING, BALL, AIRFRAME.
|
Manufacturer Information:
| 605-059-000 | 26055 | PARKER-HANNIFIN CORPORATION | | 605-059-000 | 59211 | PARKER-HANNIFIN CORPORATION | | 605-059-004 | 26055 | PARKER-HANNIFIN CORPORATION | | 605-059-004 | 59211 | PARKER-HANNIFIN CORPORATION | | M81793-FECDAA04CB71AX1 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | M81793-FECDAA04CC71AS1 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | S418FMCKHHE7P25LY167 | 40920 | MPB CORP | | M81793/16-FB9C2N1E1 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MIL-B-81793/16 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| BORE DIAMETER | 0.1250 INCHES NOMINAL | | BORE SHAPE | STRAIGHT | | FLANGE OUTSIDE DIAMETER | 0.2960 INCHES NOMINAL | | FLANGE WIDTH | 0.0310 INCHES NOMINAL | | INNER RING WIDTH | 0.1406 INCHES NOMINAL | | INTERNAL CLEARANCE | 0.0002 INCHES MINIMUM RADIAL AND 0.0005 INCHES MAXIMUM RADIAL | | LOAD DIRECTION | RADIAL | | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE | | LUBRICATION MATERIAL | GREASE | | OUTER RING OUTSIDE DIAMETER | 0.2500 INCHES NOMINAL | | OUTER RING WIDTH | 0.1094 INCHES NOMINAL | | RETAINER FABRICATION METHOD | MOLDED | | SHIELD QUANTITY | 2 | | STANDARD TOLERANCE DESIGNATION | ABEC NO. 7P | | STYLE DESIGNATOR | NON-LOADING GROOVE, NON-SEPARABLE | | SURFACE FINISH | GROUND |
|
|