| ALIGNMENT TYPE | RIGID |
| BEARING SEAL TYPE | CONTACT |
| BORE DIAMETER | 0.3745 INCHES MINIMUM AND 0.3750 INCHES MAXIMUM |
| INNER RING WIDTH | 0.9900 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM |
| LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-G-81322 MIL SPEC SINGLE MATERIAL RESPONSE |
| LUBRICATION MATERIAL | GREASE |
| OVERALL OUTSIDE DIAMETER | 0.9990 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS6440 ASSN STD SINGLE MATERIAL RESPONSE OR AMS6441 ASSN STD SINGLE MATERIAL RESPONSE INNER RING |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS6440 ASSN STD SINGLE MATERIAL RESPONSE OR AMS6441 ASSN STD SINGLE MATERIAL RESPONSE OUTER RING |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS6440 ASSN STD SINGLE MATERIAL RESPONSE OR AMS6441 ASSN STD SINGLE MATERIAL RESPONSE ROLLER |
| MATERIAL DOCUMENT AND CLASSIFICATION | MS6440 FED SPEC SINGLE MATERIAL RESPONSE OR AISI ASSN STD 2ND MATERIAL RESPONSE WASHER |
| MATERIAL | PLASTIC ACETAL SEAL |
| MATERIAL | PLASTIC POLYAMIDE (NYLON) THRUST RETAINER |
| MATERIAL | STEEL COMP E52100 OR STEEL COMP 1074 WASHER |
| MATERIAL | STEEL COMP E52100 OUTER RING |
| MATERIAL | STEEL COMP E52100 INNER RING |
| MATERIAL | STEEL COMP E52100 ROLLER |
| OUTER RING WIDTH | 0.9350 INCHES MINIMUM AND 0.9400 INCHES MAXIMUM |
| SPECIAL FEATURES | 80 PCT FULL OF SPECIFIED LUBRICANT,4 LUBE HOLES 90 DEGREES APART AND GROOVE IN INNER RINGS |
| SEAL QUANTITY | 2 |
| SURFACE FINISH | GROUND |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-C-320 FED SPEC SINGLE TREATMENT RESPONSE OUTER RING |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 1,CL 2 FED SPEC SINGLE TREATMENT RESPONSE INNER RING |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 1,CL 2 FED SPEC SINGLE TREATMENT RESPONSE WASHER |
| SURFACE TREATMENT | CADMIUM INNER RING |
| SURFACE TREATMENT | CADMIUM WASHER |
| SURFACE TREATMENT | CHROMIUM OUTER RING |