| ALIGNMENT TYPE | SELF-ALIGNING |
| BEARING SEAL TYPE | CONTACT |
| BORE DIAMETER | 0.3122 INCHES MINIMUM AND 0.3125 INCHES MAXIMUM |
| INNER RING WIDTH | 0.8650 INCHES MINIMUM AND 0.8700 INCHES MAXIMUM |
| LENGTH FROM BORE CENTER TO SHANK END | 2.4280 INCHES MINIMUM AND 2.4480 INCHES MAXIMUM |
| LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-G-81322 MIL SPEC SINGLE MATERIAL RESPONSE |
| LUBRICATION MATERIAL | GREASE |
| MATERIAL DOCUMENT AND CLASSIFICATION | AISI ASSN STD SINGLE MATERIAL RESPONSE RETAINER |
| OVERALL LENGTH | 3.0630 INCHES NOMINAL |
| OVERALL OUTSIDE DIAMETER | 1.2400 INCHES MINIMUM AND 1.2600 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6758 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-8690 MIL SPEC 2ND MATERIAL RESPONSE OUTER RING |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6758 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-8690 MIL SPEC 2ND MATERIAL RESPONSE ROD END BODY |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-7420 MIL SPEC SINGLE MATERIAL RESPONSE BALL |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-7420 MIL SPEC SINGLE MATERIAL RESPONSE INNER RING |
| MATERIAL | PLASTIC POLYTETRAFLUOROETHYLENE OR PLASTIC POLYTETRAFLUOROETHYLENE AND GLASS FIBER SEAL |
| MATERIAL | STEEL COMP 302 RETAINER |
| MATERIAL | STEEL COMP 4130 OR STEEL COMP 8620 OUTER RING |
| MATERIAL | STEEL COMP 4130 OR STEEL COMP 8620 ROD END BODY |
| MATERIAL | STEEL COMP E52100 BALL |
| MATERIAL | STEEL COMP E52100 INNER RING |
| NOMINAL THREAD SIZE | 0.438 INCHES |
| OUTER RING WIDTH | 0.6460 INCHES MINIMUM AND 0.6660 INCHES MAXIMUM |
| SPECIAL FEATURES | 80 PCT FULL OF SPECIFIED LUBRICANT; STANDARD NAS 513 KEYWAY IN SHANK |
| SEAL QUANTITY | 2 |
| SELF-ALIGNMENT ANGLE | 10.00 DEGREES NOMINAL |
| SELF-ALIGNMENT LOCATION | INTERNAL |
| SHANK DIAMETER | 0.4375 INCHES NOMINAL |
| SHANK STYLE | EXTERNALLY THREADED |
| SHANK THREAD LENGTH | 1.5320 INCHES MINIMUM AND 1.5940 INCHES MAXIMUM |
| STYLE DESIGNATOR | DOUBLE ROW, STAGGERED, BALL |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 1,CL 2 FED SPEC SINGLE TREATMENT RESPONSE ALL EXTERNAL/EXPOSED METAL SURFACES |
| SURFACE TREATMENT | CADMIUM ALL EXTERNAL/EXPOSED METAL SURFACES |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD CLASS | 3A |
| THREAD SERIES DESIGNATOR | UNJF |
| THREAD QUANTITY PER INCH | 20 |