| BEARING SEAL TYPE | CONTACT |
| BORE DIAMETER | 0.3748 INCHES MINIMUM AND 0.3750 INCHES MAXIMUM |
| BORE SHAPE | STRAIGHT |
| FLANGE OUTSIDE DIAMETER | 0.9680 INCHES MINIMUM AND 0.9690 INCHES MAXIMUM |
| FLANGE WIDTH | 0.0600 INCHES MINIMUM AND 0.0620 INCHES MAXIMUM |
| INTERNAL CLEARANCE | 0.0003 INCHES MINIMUM RADIAL AND 0.0005 INCHES MAXIMUM RADIAL |
| LOAD DIRECTION | RADIAL |
| LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-L-6085 MIL SPEC SINGLE MATERIAL RESPONSE |
| LUBRICATION MATERIAL | OIL |
| OVERALL WIDTH | 0.2802 INCHES MINIMUM AND 0.2812 INCHES MAXIMUM |
| MATERIAL | |
| OUTER RING OUTSIDE DIAMETER | 0.8748 INCHES MINIMUM AND 0.8750 INCHES MAXIMUM |
| RETAINER FABRICATION METHOD | PRESSED |
| SEAL QUANTITY | 1 |
| SHIELD QUANTITY | 1 |
| STANDARD TOLERANCE DESIGNATION | ABEC NO. 7P |
| STYLE DESIGNATOR | NON-LOADING GROOVE, NON-SEPARABLE |
| SPECIAL FEATURES | RIBBON RETAINER; SEAL ON THE FLANGED SIDE; SHIELD OPPOSITE THE FLANGED END |
| SURFACE FINISH | GROUND |