| MATERIAL | STEEL COMP 440C BALL |
| STEEL COMP 440C INNER RING |
| STEEL COMP 440C OUTER RING |
| COTTON AND |
| PLASTIC PHENOLIC RETAINER |
| STEEL CORROSION RESISTING SHIELD |
| MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD SINGLE MATERIAL RESPONSE BALL |
| 66 FED STD SINGLE MATERIAL RESPONSE INNER RING |
| 66 FED STD SINGLE MATERIAL RESPONSE OUTER RING |
| MIL-P-79,TY FBE MIL SPEC SINGLE MATERIAL RESPONSE RETAINER |
| STYLE DESIGNATOR | COUNTERBORED OUTER RINGS, NON-SEPARABLE, BACK TO BACK MOUNTING |
| OVERALL WIDTH | 0.6040 INCHES MINIMUM AND |
| 0.6240 INCHES MAXIMUM |
| BORE DIAMETER | 3.0622 INCHES MINIMUM AND |
| 3.0625 INCHES MAXIMUM |
| OVERALL OUTSIDE DIAMETER | 3.8746 INCHES MINIMUM AND |
| 3.8750 INCHES MAXIMUM |
| LUBRICATION MATERIAL | OIL |
| LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | NPE-UC7,MZF ASSOCIATES MFR REF SINGLE MATERIAL RESPONSE |
| STANDARD TOLERANCE DESIGNATION | ABEC NO. 5T |
| SURFACE FINISH | GROUND |
| RETAINER FABRICATION METHOD | MACHINED |
| SHIELD QUANTITY | 2 |
| LOAD DIRECTION | RADIAL |
| BEARING PRELOAD RATING | 100.0 POUNDS NOMINAL |
| SPECIAL FEATURES | 1 SHIELD IN EACH BEARING; BACK TO BACK MOUNTING |