| ALIGNMENT TYPE | RIGID |
| BEARING SEAL TYPE | CONTACT |
| BORE DIAMETER | 0.2500 INCHES NOMINAL |
| INNER RING WIDTH | 0.2810 INCHES NOMINAL |
| LENGTH FROM BORE CENTER TO SHANK END | 3.3800 INCHES NOMINAL |
| LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-G-81322 MIL SPEC SINGLE MATERIAL RESPONSE |
| LUBRICATION MATERIAL | GREASE |
| MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD ALL MATERIAL RESPONSES BALL |
| MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD SINGLE MATERIAL RESPONSE INNER RING |
| MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD SINGLE MATERIAL RESPONSE OUTER RING |
| OVERALL LENGTH | 3.9400 INCHES NOMINAL |
| OVERALL OUTSIDE DIAMETER | 1.1200 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 3666 ASSN STD 2ND MATERIAL RESPONSE SEAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5643 ASSN STD SINGLE MATERIAL RESPONSE ROD END BODY |
| MATERIAL | PLASTIC POLYTETRAFLUOROETHYLENE OR PLASTIC POLYTETRAFLUOROETHYLENE AND GLASS FIBER SEAL |
| MATERIAL | STEEL COMP 630 ROD END BODY |
| MATERIAL | STEEL COMP E51100 OR STEEL COMP E52100 BALL |
| MATERIAL | STEEL COMP E52100 OUTER RING |
| MATERIAL | STEEL COMP E52100 INNER RING |
| NOMINAL THREAD SIZE | 0.190 INCHES |
| OUTER RING WIDTH | 0.2190 INCHES MINIMUM AND 0.2290 INCHES MAXIMUM |
| SPECIAL FEATURES | 80 PCT FULL OF SPECIFIED LUBRICANT |
| SEAL QUANTITY | 2 |
| SHANK DIAMETER | 0.1894 INCHES MINIMUM AND 0.1900 INCHES MAXIMUM |
| SHANK STYLE | EXTERNALLY THREADED |
| SHANK THREAD LENGTH | 0.5000 INCHES NOMINAL |
| STYLE DESIGNATOR | SINGLE ROW, BALL |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | PS 13001,FSCM 76301 MFR REF SINGLE TREATMENT RESPONSE ROD END BODY |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 1,CL 2 FED SPEC SINGLE TREATMENT RESPONSE EXPOSED SURFACES AS MOUNTED |
| SURFACE TREATMENT | CADMIUM EXPOSED SURFACES AS MOUNTED |
| SURFACE TREATMENT | PASSIVATE ROD END BODY |
| TEST DATA DOCUMENT | 76301-PS21202,CLASS A-D SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD CLASS | 3A |
| THREAD SERIES DESIGNATOR | UNF |
| THREAD QUANTITY PER INCH | 32 |